(a) Check the operation of the back door opener switch assembly.
(1) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection
|
Switch Condition
|
Specified Condition
|
3 (UL) - 2 (E)
|
Back door opener switch pushed (ON)
|
Below 1 Ω
|
3 (UL) - 2 (E)
|
Back door opener switch not pushed (OFF)
|
10 kΩ or higher
|
If the result is not as specified, replace the back door opener switch assembly.
|
|
*a
|
Not Pushed (OFF)
|
*b
|
Pushed (ON)
|
*c
|
Component without harness connected
(Back Door Opener Switch Assembly)
|
|
|