Last Modified: 01-30-2024 6.11:8.1.0 Doc ID: RM100000001E3C4
Model Year Start: 2019 Model: RAV4 Prod Date Range: [11/2018 -           ]
Title: DOOR / HATCH: POWER BACK DOOR CLOSER SWITCH: INSPECTION; 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]

INSPECTION

PROCEDURE

1. INSPECT NO. 1 POWER BACK DOOR CONTROL SWITCH

(a) Check the operation of the No. 1 power back door control switch.

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Switch Condition

Specified Condition

1 (CLS) - 2 (E)

No. 1 power back door control switch not pushed

10 kΩ or higher

No. 1 power back door control switch pushed

Below 1 Ω

If the result is not as specified, replace the No. 1 power back door control switch.

*a

Component without harness connected

(No. 1 Power Back Door Control Switch)