| Last Modified: 05-08-2025 | 6.11:8.1.0 | Doc ID: RM100000001E3C7 |
| Model Year Start: 2019 | Model: RAV4 | Prod Date Range: [11/2018 - ] |
| Title: DOOR / HATCH: POWER BACK DOOR TOUCH SENSOR: REMOVAL; 2019 - 2025 MY RAV4 RAV4 HV [11/2018 - ] | ||
REMOVAL
PROCEDURE
1. REMOVE BACK DOOR CENTER GARNISH
Click here
![2019 - 2023 MY RAV4 RAV4 HV [11/2018 - 10/2023]; DOOR / HATCH: BACK DOOR: DISASSEMBLY+](/t3Portal/stylegraphics/info.gif)
2. REMOVE BACK DOOR SIDE GARNISH LH
Click here
3. REMOVE BACK DOOR SIDE GARNISH RH
HINT:
Use the same procedure described for the LH side.
4. REMOVE BACK DOOR GRIP BASE
Click here
5. REMOVE BACK DOOR GRIP
HINT:
Use the same procedure described for the back door grip base.
6. REMOVE BACK DOOR TRIM BOARD ASSEMBLY
Click here
7. REMOVE POWER BACK DOOR SENSOR ASSEMBLY LH
(a) Disconnect the connector.
|
Screw |
|
Connector |
(b) Remove the 4 screws.
(c) Using a clip remover with its tip wrapped with protective tape, remove the 2 clips and power back door sensor assembly LH.
|
Protective Tape |
|
(d) Detach the claw and remove the 4 grommets. |
|
8. REMOVE POWER BACK DOOR SENSOR ASSEMBLY RH
HINT:
Use the same procedure described for the LH side.
|
|