| Last Modified: 01-30-2024 | 6.11:8.1.0 | Doc ID: RM100000001E3CE |
| Model Year Start: 2019 | Model: RAV4 | Prod Date Range: [11/2018 - 10/2023] |
| Title: DOOR / HATCH: BACK DOOR CLOSER ECU: REMOVAL; 2019 - 2023 MY RAV4 RAV4 HV [11/2018 - 10/2023] | ||
REMOVAL
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during the multiplex network door ECU removal/installation are shown below.
Necessary Procedure After Parts Removed/Installed/Replaced (for HV Model)
|
Replaced Part or Performed Procedure |
Necessary Procedure |
Effect/Inoperative Function when Necessary Procedure not Performed |
Link |
|---|---|---|---|
|
Multiplex network door ECU |
Reset connection history |
There are cases where the connection history display differs from the vehicle condition |
|
|
Reset back door close position |
Power back door system (for HV model) |
|
Necessary Procedure After Parts Removed/Installed/Replaced (for Gasoline Model)
|
Replaced Part or Performed Procedure |
Necessary Procedure |
Effect/Inoperative Function when Necessary Procedure not Performed |
Link |
|---|---|---|---|
|
Multiplex network door ECU |
Reset connection history |
There are cases where the connection history display differs from the vehicle condition |
|
|
Reset back door close position |
Power back door system (for Gasoline model) |
|
PROCEDURE
1. REMOVE BACK DOOR CENTER GARNISH
Click here
![2019 - 2023 MY RAV4 RAV4 HV [11/2018 - 10/2023]; DOOR / HATCH: BACK DOOR: DISASSEMBLY+](/t3Portal/stylegraphics/info.gif)
2. REMOVE BACK DOOR SIDE GARNISH LH
Click here
3. REMOVE BACK DOOR SIDE GARNISH RH
HINT:
Use the same procedure described for the LH side.
4. REMOVE BACK DOOR GRIP BASE
Click here
5. REMOVE BACK DOOR GRIP
HINT:
Use the same procedure described for the back door grip base.
6. REMOVE BACK DOOR TRIM BOARD ASSEMBLY
Click here
7. REMOVE MULTIPLEX NETWORK DOOR ECU
(a) Remove the 2 bolts.
|
Bolt |
|
Connector |
(b) Detach the guide and remove the multiplex network door ECU.
(c) Disconnect the 2 connectors.
NOTICE:
- Do not subject the multiplex network door ECU to strong impacts or force, and do not drop it.
- Do not reuse the multiplex network door ECU that has been dropped.
|
|