| 
                               (a) for LH Side: 
                              (1) Operate the windshield wiper motor assembly. 
                              (2) Stop the windshield wiper motor assembly operation. 
                              (3) Check the automatic stop (park) position. 
                              HINT: 
                              After the windshield wiper motor assembly is stopped, check the automatic stop position after lifting the wiper blade 2 times. 
                              Standard Clearance:  
                              
                                 
                                 
                                 
                                    
                                       | 
                                           Area 
                                        | 
                                       
                                           Measurement 
                                        | 
                                     
                                 
                                 
                                    
                                       | 
                                           A 
                                        | 
                                       
                                           10 mm (0.394 in.) 
                                        | 
                                     
                                 
                               
                              OK:  
                              The windshield wiper motor assembly stops at the position shown in the illustration. 
                            |