REMOVAL

PROCEDURE

1. REMOVE BACK DOOR CENTER GARNISH

Click here

2. REMOVE BACK DOOR SIDE GARNISH LH

Click here

3. REMOVE BACK DOOR SIDE GARNISH RH

HINT:

Use the same procedure described for the LH side.

4. REMOVE BACK DOOR GRIP BASE

Click here

5. REMOVE BACK DOOR GRIP

HINT:

Use the same procedure described for the back door grip base.

6. REMOVE BACK DOOR TRIM BOARD ASSEMBLY

Click here

7. REMOVE REAR WIPER ARM HEAD CAP

(a) Detach the claw and open the rear wiper arm head cap as shown in the illustration.

Remove in this Direction

(b) Detach the claw and remove the rear wiper arm head cap.

8. REMOVE REAR WIPER ARM AND BLADE ASSEMBLY

(a) Remove the nut and rear wiper arm and blade assembly.

9. REMOVE REAR WIPER MOTOR ASSEMBLY

(a) for Type A:

	Bolt
	Connector

(1) Disconnect the connector.

(2) Loosen the 3 bolts and remove the rear wiper motor assembly.

NOTICE:

Do not subject the rear wiper motor assembly to strong impacts or force, and do not drop it.

(b) for Type B:

*a	Bolt (A)
*b	Bolt (B)
	Bolt
	Connector

(1) Disconnect the connector.

(2) Remove the bolt (A).

(3) Loosen the 2 bolts (B) and remove the rear wiper motor assembly.

NOTICE:

Do not subject the rear wiper motor assembly to strong impacts or force, and do not drop it.

	Bolt
	Connector

(c) for Type C:

(1) Disconnect the connector.

(2) Remove the 3 bolts and remove the rear wiper motor assembly.

NOTICE:

Do not subject the rear wiper motor assembly to strong impacts or force, and do not drop it.

*a	Bolt (A)
*b	Bolt (B)
	Bolt
	Connector

(d) for Type D:

(1) Disconnect the connector.

(2) Remove the 2 bolts (A).

(3) Loosen the bolt (B) and remove the rear wiper motor assembly.

NOTICE:

Do not subject the rear wiper motor assembly to strong impacts or force, and do not drop it.

10. REMOVE REAR WIPER MOTOR GROMMET

(a) Remove the rear wiper motor grommet.