| 
                               (a) Measure the resistance according to the value(s) in the table below. 
                              Standard Resistance:  
                              
                                 
                                 
                                 
                                 
                                    
                                       | 
                                           Tester Connection 
                                        | 
                                       
                                           Condition 
                                        | 
                                       
                                           Specified Condition 
                                        | 
                                     
                                 
                                 
                                    
                                       | 
                                           3 - 5 
                                        | 
                                       
                                           Auxiliary battery voltage not applied between terminals 1 and 2 
                                        | 
                                       
                                           10 kΩ or higher 
                                        | 
                                     
                                    
                                       | 
                                           3 - 5 
                                        | 
                                       
                                           Auxiliary battery voltage applied between terminals 1 and 2 
                                        | 
                                       
                                           Below 1 Ω 
                                        | 
                                     
                                 
                               
                              If the result is not as specified, replace the windshield wiper relay assembly. 
                            |