| Last Modified: 05-08-2025 | 6.11:8.1.0 | Doc ID: RM100000001E4T9 |
| Model Year Start: 2019 | Model: RAV4 | Prod Date Range: [11/2018 - ] |
| Title: MAINTENANCE: REAR TURN SIGNAL LIGHT BULB: INSTALLATION; 2019 - 2025 MY RAV4 RAV4 HV [11/2018 - ] | ||
INSTALLATION
CAUTION / NOTICE / HINT
HINT:
- Use the same procedure for the RH and LH sides.
- The procedure described below is for the LH side.
PROCEDURE
1. INSTALL REAR TURN SIGNAL LIGHT BULB
(a) Install the rear turn signal light bulb to the bulb socket.
|
Install in this Direction |
(b) Align the matchmark of the bulb socket with the unlock position mark, and then turn the bulb socket clockwise until the lock position mark to connect the bulb socket.
|
*a |
Matchmark |
|
*b |
Unlock Position Mark |
|
*c |
Lock Position Mark |
|
|
Turn in this Direction |
(c) Slide the rear combination light assembly LH towards the vehicle front to attach the pin and guide.
|
*a |
Pin |
|
*b |
Guide |
|
|
Slide in this Direction |
|
(d) Install the 2 screws. |
|
2. INSTALL REAR COMBINATION LIGHT COVER LH
(a) Attach the claw to install the rear combination light cover LH.
|
|
Install in this Direction |
|
|