- Perform reset memory
- Reset transaxle compensation code
- Perform road test to allow ECM to learn
| Last Modified: 01-30-2024 | 6.11:8.1.0 | Doc ID: RM100000001E6LA |
| Model Year Start: 2019 | Model: RAV4 | Prod Date Range: [11/2018 - ] |
| Title: UB80F (AUTOMATIC TRANSMISSION / TRANSAXLE): SPEED SENSOR: REMOVAL; 2019 - 2024 MY RAV4 [11/2018 - ] | ||
REMOVAL
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during transmission revolution sensor (NT) and transmission revolution sensor (NC) removal/installation are shown below.
Necessary Procedures After Parts Removed/Installed/Replaced
|
Replaced Part or Performed Procedure |
Necessary Procedure |
Effect/Inoperative Function when Necessary Procedure not Performed |
Link |
|---|---|---|---|
|
Transmission valve body assembly |
|
|
for Initialization:
for Registration:
|
PROCEDURE
1. REMOVE TRANSMISSION VALVE BODY ASSEMBLY
Click here
![2019 - 2024 MY RAV4 [11/2018 - ]; UB80F (AUTOMATIC TRANSMISSION / TRANSAXLE): VALVE BODY ASSEMBLY: REMOVAL](/t3Portal/stylegraphics/info.gif)
2. REMOVE TRANSMISSION REVOLUTION SENSOR (NT)
|
(a) Remove the bolt and transmission revolution sensor (NT) from the automatic transaxle case sub-assembly. |
|
3. REMOVE TRANSMISSION REVOLUTION SENSOR (NC)
|
(a) Remove the bolt, spacer and transmission revolution sensor (NC) from the counter drive gear sub-assembly. |
|
|
|