| 
                           Last Modified: 05-08-2025 | 
                        6.11:8.1.0  | 
                        
                           Doc ID: RM100000001E7IN | 
                      
                     
                        | 
                           Model Year Start: 2019 | 
                        
                           Model: RAV4 | 
                        
                           Prod Date Range: [11/2018 - 10/2022] | 
                      
                     
                        | 
                           Title: NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM: Display does not Dim when Light Control Switch is Turned ON; 2019 - 2022 MY RAV4 RAV4 HV [11/2018 - 10/2022] | 
                      
                   
                  
                     
                        
                           | 
                               Display does not Dim when Light Control Switch is Turned ON 
                            | 
                         
                     
                   
                   
                  CAUTION / NOTICE / HINT
                  NOTICE: 
                  When replacing the radio and display receiver assembly, always replace it with a new one. If a radio and display receiver assembly which was installed to another vehicle is used, the following may occur: 
                  
                     
                        - 
A communication malfunction DTC may be stored.
 
                        - 
The radio and display receiver assembly may not operate normally.
 
                      
                   
                  HINT: 
                  Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Navigation System. 
                  Click here
                        
                           
                               
                           
                        
                        
                           
                               
                           
                        
                     
                   
                   
                  PROCEDURE
                   
                  
                     
                        
                           | 
                               1.  
                            | 
                           
                               CHECK IMAGE QUALITY SETTING 
                            | 
                         
                     
                   
                  (a) Turn the light control switch to the tail or head position. 
                  (b) Check that the daytime screen setting on the display adjustment screen is set to on. 
                  
                     
                        
                           | 
                               Result 
                            | 
                           
                               Proceed to 
                            | 
                         
                     
                     
                        
                           | 
                               Daytime screen setting is set to on. 
                            | 
                           
                               A 
                            | 
                         
                        
                           | 
                               Daytime screen setting is set to off. 
                            | 
                           
                               B 
                            | 
                         
                     
                   
                  
                     
                        
                           | A | 
                           
                               
                            | 
                           
                               CHANGE DAYTIME SCREEN SETTING TO OFF 
                            | 
                         
                     
                   
                  
                     
                        
                           
                              
                                 | 
B
 | 
                               
                              
                                 
                                     
                                  | 
                               
                            
                         | 
                      
                   
                   
                  
                     
                        
                           | 
                               2.  
                            | 
                           
                               CHECK VEHICLE SIGNAL (OPERATION CHECK) 
                            | 
                         
                     
                   
                  
                     
                        
                           | 
                               (a) Enter the "Vehicle Signal Check Mode" screen. Refer to Check Vehicle Signal in Operation Check. 
                              Click here
                                    
                                       
                                           
                                       
                                    
                                    
                                       
                                           
                                       
                                    
                                 
                               
                            | 
                           
                              
                            | 
                         
                     
                   
                  (b) Check that the display changes between ON and OFF according to the light control switch operation. 
                  OK:  
                  
                     
                        
                        
                     
                     
                        
                           | 
                               Light Control Switch 
                            | 
                           
                               Display 
                            | 
                         
                     
                     
                        
                           | 
                               Tail or head 
                            | 
                           
                               ON 
                            | 
                         
                        
                           | 
                               Off or AUTO 
                            | 
                           
                               OFF 
                            | 
                         
                     
                   
                  
                     HINT: 
                     
                        - 
The display is updated once per second. It is normal for the display to lag behind the actual switch operation.
 
                        - 
Make sure to move the vehicle to a bright area before performing an operation check with the light control switch in the AUTO position.
 
                      
                   
                  
                  
                  
                |