Last Modified: 01-30-2024 6.11:8.1.0 Doc ID: RM100000001E7N8
Model Year Start: 2019 Model: RAV4 Prod Date Range: [11/2018 -           ]
Title: PARK ASSIST / MONITORING: PANORAMIC VIEW MONITOR SWITCH: INSPECTION; 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]

INSPECTION

PROCEDURE

1. INSPECT PANORAMIC VIEW MONITOR SWITCH

(a) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Switch Condition

Specified Condition
If the result is not as specified, replace the panoramic view monitor switch.

5 (D) - 2 (E)

Panoramic view monitor switch on (not protruding)

Below 1 Ω

Panoramic view monitor switch off (protruding)

10 kΩ or higher

*a

Component without harness connected

(Panoramic View Monitor Switch)

(b) Check that the switch illuminates.

(1) Apply auxiliary battery voltage to the panoramic view monitor switch and check that the switch illuminates.

OK:

Auxiliary Battery Connection

Specified Condition
If the result is not as specified, replace the panoramic view monitor switch.

Auxiliary Battery positive (+) → Terminal 6 (ILL+)

Auxiliary Battery negative (-) → Terminal 1 (ILL-)

Illuminates

*a

Component without harness connected

(Panoramic View Monitor Switch)