| Last Modified: 01-30-2024 | 6.11:8.1.0 | Doc ID: RM100000001EA9Z |
| Model Year Start: 2019 | Model: RAV4 | Prod Date Range: [11/2018 - ] |
| Title: BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: ELECTRONICALLY CONTROLLED BRAKE SYSTEM (w/ Vacuum Brake Booster): C050C24,C051224; Left Rear Wheel Speed Sensor Signal Stuck High; 2019 - 2024 MY RAV4 RAV4 HV [11/2018 - ] | ||
|
DTC |
C050C24 |
Left Rear Wheel Speed Sensor Signal Stuck High |
|
DTC |
C051224 |
Right Rear Wheel Speed Sensor Signal Stuck High |
DESCRIPTION
Refer to DTC C050C12
Click here
![2019 MY RAV4 RAV4 HV [11/2018 - 10/2019]; BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: ELECTRONICALLY CONTROLLED BRAKE SYSTEM (w/ Vacuum Brake Booster): C050C12,C051212; Left Rear Wheel Speed Sensor Circuit Short to Battery](/t3Portal/stylegraphics/info.gif)
|
DTC No. |
Detection Item |
DTC Detection Condition |
Trouble Area |
|---|---|---|---|
|
C050C24 |
Left Rear Wheel Speed Sensor Signal Stuck High |
The speed sensor signal is not within the specified range for 5 seconds or more. |
|
|
C051224 |
Right Rear Wheel Speed Sensor Signal Stuck High |
The speed sensor signal is not within the specified range for 5 seconds or more. |
|
*1: for 2WD
*2: for AWD
CAUTION / NOTICE / HINT
NOTICE:
After replacing or removing and installing a speed sensor, perform Dealer Mode (Signal Check) inspection to confirm that the speed sensors are operating correctly.
Click here
PROCEDURE
|
1. |
CHECK VEHICLE |
(a) Check the vehicle specification.
|
Result |
Proceed to |
|---|---|
|
for 2WD |
A |
|
for AWD |
B |
| B |
|
|
|
2. |
REPLACE REAR AXLE HUB AND BEARING ASSEMBLY |
(a) Replace the rear axle hub and bearing assembly.
Click here
| NEXT |
|
END |
|
3. |
REPLACE REAR SPEED SENSOR |
(a) Replace the rear speed sensor.
Click here
| NEXT |
|
END |
|
|