| 
                           Last Modified: 05-08-2025 | 
                        6.11:8.1.0  | 
                        
                           Doc ID: RM100000001EABG | 
                      
                     
                        | 
                           Model Year Start: 2019 | 
                        
                           Model: RAV4 | 
                        
                           Prod Date Range: [11/2018 -                    
                                       ] | 
                      
                     
                        | 
                           Title: BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: ELECTRONICALLY CONTROLLED BRAKE SYSTEM (w/ Vacuum Brake Booster): Slip Indicator Light does not Come ON; 2019 - 2025 MY RAV4 RAV4 HV [11/2018 -        ] | 
                      
                   
                  
                     
                        
                           | 
                               Slip Indicator Light does not Come ON 
                            | 
                         
                     
                   
                   
                  DESCRIPTION
                  The skid control ECU (brake actuator assembly) controls the slip indicator light in the combination meter assembly via CAN communication. 
                   
                  CAUTION / NOTICE / HINT
                  NOTICE: 
                  After replacing the skid control ECU (brake actuator assembly), perform acceleration sensor zero point calibration and store system information memorization. 
                  Click here
                        
                           
                               
                           
                        
                     
                   
                   
                  PROCEDURE
                   
                  
                     
                        
                           | 
                               1.  
                            | 
                           
                               INSPECT COMBINATION METER ASSEMBLY 
                            | 
                         
                     
                   
                  (a) Connect the Techstream to the DLC3. 
                  (b) Turn the ignition switch to ON. 
                  (c) Enter the following menus: Body Electrical / Combination Meter / Active Test. 
                  (d) Perform the Active Test of the combination meter assembly using the Techstream. 
                  Click here
                        
                           
                               
                           
                        
                        
                           
                               
                           
                        
                        
                           
                               
                           
                        
                     
                   
                  Body Electrical > Combination Meter > Active Test
                  
                     
                        
                     
                     
                        
                           | 
                               Tester Display 
                            | 
                         
                     
                     
                        
                           | 
                               Slip Warning 
                            | 
                         
                     
                   
                  (e) Check the combination meter assembly. 
                  OK:  
                  The slip indicator light turns on or off in accordance with the Techstream operation. 
                  
                  
                  
                |