| 
                           Last Modified: 05-08-2025 | 
                        6.11:8.1.0  | 
                        
                           Doc ID: RM100000001EF3O | 
                      
                     
                        | 
                           Model Year Start: 2019 | 
                        
                           Model: RAV4 | 
                        
                           Prod Date Range: [11/2018 -                    
                                       ] | 
                      
                     
                        | 
                           Title: MIRROR (EXT): OUTER REAR VIEW MIRROR: DISASSEMBLY; 2019 - 2025 MY RAV4 RAV4 HV [11/2018 -        ] | 
                      
                   
                  DISASSEMBLY
                   
                  CAUTION / NOTICE / HINT
                  
                     HINT: 
                     
                        - 
Use the same procedure for the RH and LH sides.
 
                        - 
The procedure listed below is for the LH side.
 
                      
                   
                   
                  PROCEDURE
                   
                  1. REMOVE OUTER MIRROR LH 
                  Click here
                        
                           
                               
                           
                        
                     
                   
                   
                  2. REMOVE OUTER MIRROR COVER LH 
                  Click here
                        
                           
                               
                           
                        
                     
                   
                   
                  3. REMOVE NO. 3 OUTER MIRROR COVER LH 
                  Click here
                        
                           
                               
                           
                        
                     
                   
                   
                  4. REMOVE OUTER MIRROR ACTUATOR ASSEMBLY LH (for TMMC Made) 
                  (a) Put the marking to the wire harness as shown in the illustration. 
                   
                  
                     
                        
                        
                     
                     
                        
                           | 
                               *a 
                            | 
                           
                               Marking 
                            | 
                         
                        
                           
                               
                            | 
                           
                               Vinyl Tape 
                            | 
                         
                     
                   
                  (b) Remove the vinyl tape. 
                  (c) Remove the outer mirror actuator assembly LH. 
                  
                     
                        
                           | 
                               (1) Put the marking to the wire harness as shown in the illustration. 
                            | 
                           
                              
                            | 
                         
                     
                   
                  (2) Pull the wire harness sub-assembly as shown in the illustration to remove the wire harness sub-assembly. 
                  (3) Detach the guide. 
                  
                     
                        
                           | 
                               (4) Remove the 3 screws and outer mirror actuator assembly LH. 
                            | 
                           
                              
                            | 
                         
                     
                   
                  (5) Using a thin-bladed screwdriver, detach the claw to disconnect the wire harness connector. 
                   
                  
                     
                        
                        
                     
                     
                        
                           
                               
                            | 
                           
                               Protective Tape 
                            | 
                         
                     
                   
                   
                  5. REMOVE OUTER MIRROR HOLE COVER LH 
                  (a) Detach the claw and remove the outer mirror hole cover LH. 
                   
                  
                     
                        
                        
                     
                     
                        
                           
                               
                            | 
                           
                               Remove in this Direction 
                            | 
                         
                     
                   
                   
                  6. REMOVE SIDE TURN SIGNAL LIGHT ASSEMBLY LH (w/ Side Turn Signal Light) 
                  Click here
                        
                           
                               
                           
                        
                     
                   
                   
                  7. REMOVE OUTER MIRROR LIGHT (w/ Foot light) 
                  
                     
                        
                           | 
                               (a) Remove the 2 screws and outer mirror light. 
                            | 
                           
                              
                            | 
                         
                     
                   
                   
                  8. REMOVE SIDE TELEVISION CAMERA ASSEMBLY LH (w/ Panoramic View Monitor System) 
                  Click here
                        
                           
                               
                           
                        
                     
                   
                   
                  9. REMOVE OUTER MIRROR HOLE COVER LH (for TMC Made, w/ Panoramic View Monitor System) 
                  Click here
                        
                           
                               
                           
                        
                     
                   
                  
                |