| 
                           Last Modified: 05-08-2025 | 
                        6.11:8.1.0  | 
                        
                           Doc ID: RM100000001EF3S | 
                      
                     
                        | 
                           Model Year Start: 2019 | 
                        
                           Model: RAV4 | 
                        
                           Prod Date Range: [11/2018 -                    
                                       ] | 
                      
                     
                        | 
                           Title: MIRROR (EXT): OUTER REAR VIEW MIRROR GLASS: REMOVAL; 2019 - 2025 MY RAV4 RAV4 HV [11/2018 -        ] | 
                      
                   
                  REMOVAL
                   
                  CAUTION / NOTICE / HINT
                  
                     HINT: 
                     
                        - 
Use the same procedure for the RH and LH sides.
 
                        - 
The procedure listed below is for the LH side.
 
                      
                   
                   
                  PROCEDURE
                   
                  1. REMOVE OUTER MIRROR LH 
                  (a) Push the upper part of the outer mirror LH surface and tilt it. 
                   
                  
                     
                        
                        
                     
                     
                        
                           
                               
                            | 
                           
                               Push in this Direction 
                            | 
                         
                        
                           
                               
                            | 
                           
                               Protective Tape 
                            | 
                         
                     
                   
                  (b) Apply protective tape to the areas shown in the illustration. 
                  (c) Push down the lower part of the outer mirror LH surface and tilt it. 
                   
                  
                     
                        
                        
                     
                     
                        
                           
                               
                            | 
                           
                               Push in this Direction 
                            | 
                         
                        
                           
                               
                            | 
                           
                               Protective Tape 
                            | 
                         
                     
                   
                  (d) Apply protective tape as shown in the illustration. 
                  (e) Push the upper part of the outer mirror LH surface and tilt it. 
                   
                  
                     
                        
                        
                     
                     
                        
                           
                               
                            | 
                           
                               Move in this Direction 
                            | 
                         
                        
                           
                               
                            | 
                           
                               Protective Tape 
                            | 
                         
                     
                   
                  (f) Using moulding remover D, detach the claw. 
                  (g) Push down the lower part of the outer mirror LH surface and tilt it. 
                   
                  
                     
                        
                        
                     
                     
                        
                           
                               
                            | 
                           
                               Move in this Direction 
                            | 
                         
                        
                           
                               
                            | 
                           
                               Protective Tape 
                            | 
                         
                     
                   
                  (h) Using moulding remover D, detach the claw and remove the outer mirror LH. 
                  
                     
                        
                           | 
                               (i) w/ Mirror Heater: 
                              (1) Disconnect the  mirror heater connector. 
                              
                                 NOTICE: 
                                 
                                    - 
Do not raise the claw higher than is necessary as it will damage the claw of the terminal.
 
                                    - 
If the claw of the connector is damaged, replace the outer mirror LH with a new one.
 
                                    - 
If there is damage to the wire harness or an open circuit has occurred, replace the outer rear view mirror assembly LH with a new one.
 
                                  
                               
                            | 
                           
                              
                            | 
                         
                     
                   
                  
                     
                        
                           | 
                               (j) w/ Blind Spot Monitor System: 
                              (1) Disconnect the blind spot monitor indicator connector. 
                            | 
                           
                              
                            | 
                         
                     
                   
                  
                |