| Last Modified: 05-08-2025 | 6.11:8.1.0 | Doc ID: RM100000001EKJ1 |
| Model Year Start: 2019 | Model: RAV4 HV | Prod Date Range: [11/2018 - 08/2020] |
| Title: HYBRID / BATTERY CONTROL: HYBRID CONTROL SYSTEM (for 2WD with NICKEL METAL HYDRIDE BATTERY): P060694; Hybrid/EV Powertrain Control Module Processor Unexpected Operation; 2019 - 2020 MY RAV4 HV [11/2018 - 08/2020] | ||
|
DTC |
P060694 |
Hybrid/EV Powertrain Control Module Processor Unexpected Operation |
DTC SUMMARY
MALFUNCTION DESCRIPTION
The main CPU and sub CPU of the Hybrid vehicle control ECU assembly monitor each other.
The cause of this malfunction may be the following:
Hybrid vehicle control ECU assembly internal malfunction
- Hybrid vehicle control ECU assembly malfunction
DESCRIPTION
The hybrid vehicle control ECU assembly monitors its internal operation and will store these DTCs when it detects an internal malfunction.
|
DTC No. |
Detection Item |
DTC Detection Condition |
Trouble Area |
MIL |
Warning Indicate |
|---|---|---|---|---|---|
|
P060694 |
Hybrid/EV Powertrain Control Module Processor Unexpected Operation |
The main CPU value received by the sub CPU of the hybrid vehicle control ECU assembly exceeds the threshold for a certain period of time. (1 trip detection logic) |
Hybrid vehicle control ECU assembly |
Comes on |
Master Warning: Comes on |
CONFIRMATION DRIVING PATTERN
HINT:
After repair has been completed, clear the DTC and then check that the vehicle has returned to normal by performing the following All Readiness check procedure.
Click here
![2019 - 2020 MY RAV4 HV [11/2018 - 08/2020]; HYBRID / BATTERY CONTROL: HYBRID CONTROL SYSTEM (for 2WD with NICKEL METAL HYDRIDE BATTERY): UTILITY](/t3Portal/stylegraphics/info.gif)
- Connect the Techstream to the DLC3.
- Turn the power switch on (IG) and turn the Techstream on.
- Clear the DTCs (even if no DTCs are stored, perform the clear DTC procedure).
- Turn the power switch off and wait for 2 minutes or more.
- Turn the power switch on (IG) and turn the Techstream on.
- Turn the power switch on (READY) and wait for 10 seconds or more.
- Enter the following menus: Powertrain / Hybrid Control / Utility / All Readiness.
-
Check the DTC judgment result.
HINT:
- If the judgment result shows NORMAL, the system is normal.
- If the judgment result shows ABNORMAL, the system has a malfunction.
- If the judgment result shows INCOMPLETE, perform driving pattern again.
PROCEDURE
|
1. |
CHECK DTC OUTPUT (HYBRID CONTROL) |
(a) Connect the Techstream to the DLC3.
(b) Turn the power switch on (IG).
(c) Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.
(d) Check for DTCs.
Powertrain > Hybrid Control > Trouble Codes
|
Result |
Proceed to |
|---|---|
|
P060694 only is output. |
A |
|
DTCs except P060694 are output. |
B |
(e) Turn the power switch off.
| A |
|
REPLACE HYBRID VEHICLE CONTROL ECU ASSEMBLY
|
| B |
|
GO TO DTC CHART (HYBRID CONTROL SYSTEM)
|
|
|