Last Modified: 01-30-2024 |
6.11:8.1.0 |
Doc ID: RM100000001EKNA |
Model Year Start: 2019 |
Model: RAV4 HV |
Prod Date Range: [11/2018 - 08/2020] |
Title: HYBRID / BATTERY CONTROL: MOTOR GENERATOR CONTROL SYSTEM (for 2WD with NICKEL METAL HYDRIDE BATTERY): P0C3811,...,P0C3D15; DC/DC Converter Temperature Sensor "A" Circuit Short to Ground; 2019 - 2020 MY RAV4 HV [11/2018 - 08/2020] |
DTC
|
P0C3811
|
DC/DC Converter Temperature Sensor "A" Circuit Short to Ground
|
DTC
|
P0C3815
|
DC/DC Converter Temperature Sensor "A" Circuit Short to Battery or Open
|
DTC
|
P0C3D11
|
DC/DC Converter Temperature Sensor "B" Circuit Short to Ground
|
DTC
|
P0C3D15
|
DC/DC Converter Temperature Sensor "B" Circuit Short to Battery or Open
|
DESCRIPTION
The motor generator control ECU (MG ECU) located in the inverter with converter assembly detects the temperature of the boost converter using the temperature sensor built into the boost converter. The motor generator control ECU (MG ECU) detects malfunctions in the boost converter temperature sensor and its wiring.
DTC No.
|
Detection Item
|
DTC Detection Condition
|
Trouble Area
|
MIL
|
Warning Indicate
|
P0C3811
|
DC/DC Converter Temperature Sensor "A" Circuit Short to Ground
|
Short to ground detected in boost converter temperature sensor (upper) signal circuit
(1 trip detection logic)
|
Inverter with converter assembly
|
Comes on
|
Master Warning:
Comes on
|
P0C3815
|
DC/DC Converter Temperature Sensor "A" Circuit Short to Battery or Open
|
Open or short to +B detected in boost converter temperature sensor (upper) signal circuit
(1 trip detection logic)
|
Inverter with converter assembly
|
Comes on
|
Master Warning:
Comes on
|
P0C3D11
|
DC/DC Converter Temperature Sensor "B" Circuit Short to Ground
|
Short to ground detected in boost converter temperature sensor (lower) signal circuit
(1 trip detection logic)
|
Inverter with converter assembly
|
Comes on
|
Master Warning:
Comes on
|
P0C3D15
|
DC/DC Converter Temperature Sensor "B" Circuit Short to Battery or Open
|
Open or short to +B detected in boost converter temperature sensor (lower) signal circuit
(1 trip detection logic)
|
Inverter with converter assembly
|
Comes on
|
Master Warning:
Comes on
|
Related Data List
DTC No.
|
Data List
|
P0C3811
|
Boosting Converter Temperature (Upper)
|
P0C3815
|
P0C3D11
|
Boosting Converter Temperature 1 (Lower)
|
P0C3D15
|
CONFIRMATION DRIVING PATTERN
HINT:
After repair has been completed, clear the DTC and then check that the vehicle has returned to normal by performing the following All Readiness check procedure.
Click here
-
Connect the Techstream to the DLC3.
-
Turn the power switch on (IG) and turn the Techstream on.
-
Clear the DTCs (even if no DTCs are stored, perform the clear DTC procedure).
-
Turn the power switch off and wait for 2 minutes or more.
-
Turn the power switch on (IG) and turn the Techstream on.
-
With power switch on (IG) and wait for 5 seconds or more.
-
Enter the following menus: Powertrain / Motor Generator / Utility / All Readiness.
-
Check the DTC judgment result.
HINT:
-
If the judgment result shows NORMAL, the system is normal.
-
If the judgment result shows ABNORMAL, the system has a malfunction.
-
If the judgment result shows INCOMPLETE, perform driving pattern again.
PROCEDURE
1.
|
REFER TO REPLACE INVERTER WITH CONVERTER ASSEMBLY PARTS
|
Click here
NEXT |
|
COMPLETED
|
|