| Last Modified: 05-08-2025 | 6.11:8.1.0 | Doc ID: RM100000001ENPW |
| Model Year Start: 2019 | Model: RAV4 | Prod Date Range: [11/2018 - 12/2021] |
| Title: CRUISE CONTROL: CAMERA HEATER: REMOVAL; 2019 - 2021 MY RAV4 RAV4 HV [11/2018 - 12/2021] | ||
REMOVAL
PROCEDURE
1. REMOVE FORWARD RECOGNITION CAMERA
Click here
![2019 - 2021 MY RAV4 RAV4 HV [11/2018 - 12/2021]; CRUISE CONTROL: FRONT CAMERA: REMOVAL](/t3Portal/stylegraphics/info.gif)
2. REMOVE FORWARD RECOGNITION WITH HEATER HOOD SUB-ASSEMBLY
NOTICE:
- Do not touch the inner surface of the forward recognition with heater hood sub-assembly.
- Do not apply force to the heating element of the forward recognition with heater hood sub-assembly or an open circuit may result.
|
Inner Surface of Forward Recognition with Heater Hood Sub-assembly |
|
(a) Disconnect the connector. NOTICE: When disconnecting the connector, do not forcibly pull the wire harness. |
|
(b) Detach the connector clamp.
|
*a |
Wire Harness |
- |
- |
(c) Remove the wire harness from the guide in the order shown in the illustration.
NOTICE:
Do not pull the harness forcibly when remove the wire harness.
(d) Push the claw and pull the forward recognition with heater hood sub-assembly in the direction indicated by the arrow (1) in the illustration to detach the claw.
|
Remove in this Direction (1) |
|
Remove in this Direction (2) |
|
Push |
|
|
Heater Area |
NOTICE:
Do not press the heater area.
(e) Pull the forward recognition with heater hood sub-assembly in the direction indicated by the arrow (2) as shown in the illustration to detach the guide and remove the forward recognition with heater hood sub-assembly.
|
|