Last Modified: 01-30-2024 6.11:8.1.0 Doc ID: RM100000001ENQF
Model Year Start: 2019 Model: RAV4 Prod Date Range: [11/2018 - 10/2019]
Title: SLIDING ROOF / CONVERTIBLE: SLIDING ROOF SWITCH ASSEMBLY: INSPECTION; 2019 MY RAV4 RAV4 HV [11/2018 - 10/2019]

INSPECTION

PROCEDURE

1. INSPECT MAP LIGHT SUB-ASSEMBLY (for Panoramic Moon Roof)

(a) Check the sliding roof switch (map light sub-assembly).

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

14 (OPN) - 11 (GND)

OPEN switch ON

Below 100 Ω

OPEN switch OFF

10 kΩ or higher

13 (CLS) - 11 (GND)

CLOSE switch ON

Below 100 Ω

CLOSE switch OFF

10 kΩ or higher

17 (B) - 11 (GND)

Tilt switch ON

Below 100 Ω

Tilt switch OFF

10 kΩ or higher

16 (UP) - 11 (GND)

Roof sunshade OPEN switch ON

Below 100 Ω

Roof sunshade OPEN switch OFF

10 kΩ or higher

15 (DOWN) - 11 (GND)

Roof sunshade CLOSE switch ON

Below 100 Ω

Roof sunshade CLOSE switch OFF

10 kΩ or higher

If the result is not as specified, replace the sliding roof switch (map light sub-assembly).

*a

Component without harness connected

(Sliding Roof Switch (Map Light Sub-assembly))

2. INSPECT MAP LIGHT SUB-ASSEMBLY (for Moon Roof)

(a) for TMC Made:

(1) Check the sliding roof switch (map light sub-assembly).

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:

    Tester Connection

    Condition

    Specified Condition

    14 (OPN) - 11 (GND)

    OPEN switch ON

    Below 100 Ω

    OPEN switch OFF

    10 kΩ or higher

    13 (CLS) - 11 (GND)

    CLOSE switch ON

    Below 100 Ω

    CLOSE switch OFF

    10 kΩ or higher

    16 (UP) - 11 (GND)

    UP switch ON

    Below 100 Ω

    UP switch OFF

    10 kΩ or higher

    15 (DPWN) - 11 (GND)

    DOWN switch ON

    Below 100 Ω

    DOWN switch OFF

    10 kΩ or higher

    If the result is not as specified, replace the sliding roof switch (map light sub-assembly).

*a

Component without harness connected

(Sliding Roof Switch (Map Light Sub-assembly))

(b) Except TMC Made:

(1) Check the sliding roof switch (map light sub-assembly).

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:

    Tester Connection

    Condition

    Specified Condition

    7 (OPN) - 20 (GND)

    OPEN switch ON

    Below 100 Ω

    OPEN switch OFF

    10 kΩ or higher

    8 (CLS) - 20 (GND)

    CLOSE switch ON

    Below 100 Ω

    CLOSE switch OFF

    10 kΩ or higher

    16 (UP) - 20 (GND)

    UP switch ON

    Below 100 Ω

    UP switch OFF

    10 kΩ or higher

    17 (DOWN) - 20 (GND)

    DOWN switch ON

    Below 100 Ω

    DOWN switch OFF

    10 kΩ or higher

    If the result is not as specified, replace the sliding roof switch (map light sub-assembly).

*a

Component without harness connected

(Sliding Roof Switch (Map Light Sub-assembly))