| 
                           Last Modified: 05-08-2025 | 
                        6.11:8.1.0  | 
                        
                           Doc ID: RM100000001ENRE | 
                      
                     
                        | 
                           Model Year Start: 2019 | 
                        
                           Model: RAV4 | 
                        
                           Prod Date Range: [11/2018 -                    
                                       ] | 
                      
                     
                        | 
                           Title: WINDOW / GLASS: WINDOW DEFOGGER WIRE: REPAIR; 2019 - 2025 MY RAV4 RAV4 HV [11/2018 -        ] | 
                      
                   
                  REPAIR
                   
                  PROCEDURE
                   
                  1. REPAIR BACK DOOR GLASS (REAR WINDOW DEFOGGER WIRE) 
                   
                  
                     
                        
                        
                     
                     
                        
                           | 
                               *a 
                            | 
                           
                               Masking Tape 
                            | 
                         
                        
                           | 
                               *b 
                            | 
                           
                               Broken Wire 
                            | 
                         
                        
                           | 
                               *c 
                            | 
                           
                               Repair Point 
                            | 
                         
                     
                   
                  (a) Clean the broken wire tips with a grease, wax and silicone remover. 
                  (b) Place masking tape along both sides of the wire. 
                  
                     
                        
                           | 
                               (c) Thoroughly mix the repair agent. 
                            | 
                           
                              
                            | 
                         
                     
                   
                  (d) Using a fine tip brush, apply a small amount of the agent to the wire. 
                  (e) After a few minutes, remove the masking tape. 
                  NOTICE: 
                  Do not use the rear window defogger for at least 24 hours after performing the repair. 
                  
                |