| Last Modified: 05-08-2025 | 6.11:8.1.0 | Doc ID: RM100000001EPFF |
| Model Year Start: 2019 | Model: RAV4 | Prod Date Range: [11/2018 - ] |
| Title: LIGHTING (EXT): REAR COMBINATION LIGHT ASSEMBLY: INSTALLATION; 2019 - 2025 MY RAV4 RAV4 HV [11/2018 - ] | ||
INSTALLATION
CAUTION / NOTICE / HINT
HINT:
- Use the same procedure for the RH and LH sides.
- The procedure described below is for the LH side.
PROCEDURE
1. INSTALL REAR COMBINATION LIGHT ASSEMBLY LH
(a) Pass the wire harness into the vehicle and install the grommet.
|
Install in this Direction |
(b) Align the guide and pin to set the rear combination light assembly LH.
|
*a |
Pin |
|
*b |
Guide |
|
|
Push in this Direction |
(c) Push the rear combination light assembly LH towards the vehicle front to attach the pin and guide.
|
(d) Install the 2 screws. |
|
|
(e) Insert your hand between the deck trim side panel assembly LH and the body and connect the connector. |
|
2. INSTALL REAR COMBINATION LIGHT COVER LH
(a) Attach the claw to install the rear combination light cover LH.
|
|
Install in this Direction |
3. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH
(a) Return the rear side of the deck trim side panel assembly LH to its original position.
Click here
![2019 MY RAV4 RAV4 HV [11/2018 - 02/2019]; INTERIOR PANELS / TRIM: ROOF HEADLINING: INSTALLATION+](/t3Portal/stylegraphics/info.gif)
4. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY
Click here
5. INSTALL REAR FLOOR FINISH PLATE
Click here
6. INSTALL REAR NO. 3 FLOOR BOARD
Click here
7. INSTALL DECK BOARD ASSEMBLY
Click here
|
|