| Last Modified: 05-08-2025 | 6.11:8.1.0 | Doc ID: RM100000001EPG5 |
| Model Year Start: 2019 | Model: RAV4 | Prod Date Range: [11/2018 - ] |
| Title: LIGHTING (EXT): SWITCH HOUSING: INSPECTION; 2019 - 2025 MY RAV4 RAV4 HV [11/2018 - ] | ||
INSPECTION
PROCEDURE
1. INSPECT STEERING WHEEL SWITCH HOUSING
(a) Check the resistance.
(1) Inspect the light switch circuit.
Measure the resistance according to the value(s) in the table below.
|
*a |
Component without harness connected (Steering Wheel Switch Housing) |
- |
- |
Standard Resistance:
|
Tester Connection |
Condition |
Specified Condition |
|---|---|---|
| If the result is not as specified, replace the steering wheel switch housing. | ||
|
C-2 - A-2 |
Always |
Below 1 Ω |
|
C-3 - A-14 |
||
|
C-4 - A-5 |
||
|
C-5 - A-10 |
||
|
C-6 - A-1 |
||
|
C-7 - A-6 |
||
|
C-11 - A-4 |
||
|
C-13 - A-12 |
||
(2) Inspect the turn signal switch circuit.
Measure the resistance according to the value(s) in the table below.
|
*a |
Component without harness connected (Steering Wheel Switch Housing) |
- |
- |
Standard Resistance:
|
Tester Connection |
Condition |
Specified Condition |
|---|---|---|
| If the result is not as specified, replace the steering wheel switch housing. | ||
|
C-8 - A-9 |
Always |
Below 1 Ω |
|
C-9 - A-3 |
||
|
C-10 - A-11 |
||
|
C-13 - A-12 |
||
(3) Inspect the wiper switch circuit.
Measure the resistance according to the value(s) in the table below.
|
*a |
Component without harness connected (Steering Wheel Switch Housing) |
- |
- |
Standard Resistance:
|
Tester Connection |
Condition |
Specified Condition |
|---|---|---|
| If the result is not as specified, replace the steering wheel switch housing. | ||
|
C-24 - B-10 |
Always |
Below 1 Ω |
|
C-25 - B-13 |
||
|
C-26 - B-11 |
||
|
C-27 - B-12 |
||
|
C-28 - B-14 |
||
|
C-29 - B-7 |
||
|
C-30 - B-6 |
||
|
C-31 - B-15 |
||
|
C-32 - B-9 |
||
|
C-33 - B-5 |
||
|
C-34 - B-4 |
||
|
|