| Last Modified: 01-30-2024 | 6.11:8.1.0 | Doc ID: RM100000001EPGF |
| Model Year Start: 2019 | Model: RAV4 | Prod Date Range: [11/2018 - ] |
| Title: LIGHTING (EXT): STOP LIGHT SWITCH: INSTALLATION; 2019 - 2024 MY RAV4 RAV4 HV [11/2018 - ] | ||
INSTALLATION
PROCEDURE
1. INSTALL STOP LIGHT SWITCH MOUNTING ADJUSTER
|
(a) Attach the claw to install a new stop light switch mounting adjuster. |
|
2. INSTALL STOP LIGHT SWITCH ASSEMBLY
|
(a) Insert the stop light switch assembly to the stop light switch mounting adjuster until the switch body slightly touches the brake pedal. NOTICE: Do not depress the brake pedal. |
|
(b) Turn the stop light switch assembly clockwise by approximately one fourth of a rotation.
|
*a |
Protrusion Amount Measurement Area |
|
Turn in this Direction |
(c) Check the protrusion amount of the shaft.
Standard:
0.5 to 2.6 mm (0.0197 to 0.1024 in.)
|
(d) Connect the connector. |
|
3. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
Click here
![2019 - 2020 MY RAV4 RAV4 HV [11/2018 - 08/2020]; INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: INSTALLATION+](/t3Portal/stylegraphics/info.gif)
|
|