| Last Modified: 01-30-2024 | 6.11:8.1.0 | Doc ID: RM100000001EPGQ |
| Model Year Start: 2019 | Model: RAV4 | Prod Date Range: [11/2018 - 02/2019] |
| Title: LIGHTING (EXT): HEIGHT CONTROL SENSOR: REMOVAL; 2019 MY RAV4 RAV4 HV [11/2018 - 02/2019] | ||
REMOVAL
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are installed, removed or replaced during the rear height control sensor sub-assembly LH removal/installation are shown below.
Necessary Procedures After Parts Removed/Installed/Replaced
|
Replacement Part or Procedure |
Necessary Procedures |
Effects/Inoperative Functions when not Performed |
Link |
|---|---|---|---|
|
Work that changes the vehicle height such as replacement or removal/installation of the rear height control sensor sub-assembly LH or replacement of suspension components |
Initialization of the headlight ECU sub-assembly LH |
Automatic headlight beam level control system |
|
![2019 - 2021 MY RAV4 RAV4 HV [11/2018 - 12/2021]; LIGHTING (EXT): LIGHTING SYSTEM (w/ Headlight ECU without AFS): INITIALIZATION](/t3Portal/stylegraphics/info.gif)
PROCEDURE
1. REMOVE REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH
(a) Disconnect the connector.
|
Bolt |
|
Nut |
|
Connector |
(b) Remove the bolt and nut.
(c) Detach the hook and remove the rear height control sensor sub-assembly LH.
(d) Pull out the rear height control sensor bracket from the No. 2 lower arm.
|
Pull Out in this Direction |
NOTICE:
If the rear height control sensor sub-assembly LH has been dropped, replace it with a new one.
|
|