| Last Modified: 01-30-2024 | 6.11:8.1.0 | Doc ID: RM100000001ES1E |
| Model Year Start: 2019 | Model: RAV4 | Prod Date Range: [11/2018 - ] |
| Title: TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING SYSTEM: C2176; Receiver Error; 2019 - 2024 MY RAV4 RAV4 HV [11/2018 - ] | ||
|
DTC |
C2176 |
Receiver Error |
DESCRIPTION
Tire pressure warning valve and transmitter signals are transmitted to the tire pressure warning ECU and receiver in the vehicle as radio waves.
|
DTC No. |
Detection Item |
DTC Detection Condition |
Trouble Area |
Note |
|---|---|---|---|---|
|
C2176 |
Receiver Error |
Malfunction in the tire pressure warning ECU and receiver internal circuit |
Tire pressure warning ECU and receiver |
- |
CAUTION / NOTICE / HINT
NOTICE:
- When replacing the tire pressure warning ECU and receiver, read the transmitter IDs and number of the transmitters (4 or 5) stored in the old ECU using the Techstream and write them down before removal.
-
It is necessary to perform initialization
![2019 - 2021 MY RAV4 RAV4 HV [11/2018 - 12/2021]; TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING SYSTEM: INITIALIZATION](/t3Portal/stylegraphics/info.gif)
after registration
of the transmitter IDs into the tire pressure warning ECU and receiver if the ECU has been replaced.
PROCEDURE
|
1. |
CHECK DTC OUTPUT (C2176) |
(a) Clear the DTCs.
Chassis > Tire Pressure Monitor > Clear DTCs
(b) Turn the ignition switch off.
(c) Turn the ignition switch to ON and check for DTCs.
Chassis > Tire Pressure Monitor > Trouble Codes
OK:
DTC C2176 is not output.
| OK |
|
END |
| NG |
|
|
|