(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection
|
Switch Condition
|
Specified Condition
|
1 - Switch body
|
Pushed
|
10 kΩ or higher
|
Not pushed
|
Below 1 Ω
|
HINT:
Connect the negative (-) tester lead near the bolt hole.
If the result is not as specified, replace the front door courtesy light switch assembly.
|
|
*a
|
Component without harness connected
(Front Door Courtesy Light Switch Assembly)
|
|
|