| 
                               (a) Measure the resistance according to the value(s) in the table below. 
                              Standard Resistance:  
                              
                                 
                                 
                                 
                                 
                                    
                                       | 
                                           Tester Connection 
                                        | 
                                       
                                           Switch Condition 
                                        | 
                                       
                                           Specified Condition 
                                        | 
                                     
                                 
                                 
                                    
                                       | 
                                           1 - Switch body 
                                        | 
                                       
                                           Pushed 
                                        | 
                                       
                                           10 kΩ or higher 
                                        | 
                                     
                                    
                                       | 
                                           Not pushed 
                                        | 
                                       
                                           Below 1 Ω 
                                        | 
                                     
                                 
                               
                              HINT: 
                              Connect the negative (-) tester lead near the bolt hole. 
                              If the result is not as specified, replace the front door courtesy light switch assembly. 
                            | 
                           
                              
                                 
                                    
                                        
                                     | 
                                  
                                 
                                    
                                       
                                          
                                             
                                             
                                          
                                          
                                             
                                                | 
                                                    *a 
                                                 | 
                                                
                                                    Component without harness connected 
                                                   (Front Door Courtesy Light Switch Assembly) 
                                                 | 
                                              
                                          
                                        
                                     | 
                                  
                               
                            |