| Last Modified: 01-30-2024 | 6.11:8.1.0 | Doc ID: RM100000001EV9I |
| Model Year Start: 2019 | Model: RAV4 | Prod Date Range: [11/2018 - ] |
| Title: A25A-FKS (ENGINE CONTROL): ACCELERATOR PEDAL: INSTALLATION; 2019 - 2024 MY RAV4 [11/2018 - ] | ||
INSTALLATION
PROCEDURE
1. INSTALL ACCELERATOR PEDAL ASSEMBLY
|
(a) Attach the claw to install the accelerator pedal assembly. |
|
(b) Install the 2 bolts.
Torque:
7.5 N·m {76 kgf·cm, 66 in·lbf}
2. INSTALL ACCELERATOR PEDAL PAD
(a) Attach the 4 claws to install the accelerator pedal pad to the accelerator pedal assembly.
3. INSTALL ACCELERATOR PEDAL(W/SENSOR) ROD ASSEMBLY
NOTICE:
- Avoid physical shock to the accelerator pedal sensor assembly.
- Do not disassemble the accelerator pedal sensor assembly.
- The accelerator pedal sensor assembly does not require lubrication.
- Do not apply oil or other lubricants to the accelerator pedal sensor assembly. If applied, the accelerator pedal sensor assembly must be replaced.
(a) Connect the rod of the accelerator pedal sensor assembly to the accelerator pedal assembly and install the accelerator pedal sensor assembly with the 3 nuts.
Torque:
7.5 N·m {76 kgf·cm, 66 in·lbf}
(b) Connect the accelerator pedal sensor assembly connector.
4. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
Click here
![2019 - 2020 MY RAV4 RAV4 HV [11/2018 - 08/2020]; INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: INSTALLATION+](/t3Portal/stylegraphics/info.gif)
5. INSTALL COWL SIDE TRIM BOARD LH
Click here
6. INSTALL FRONT DOOR SCUFF PLATE LH
Click here
|
|