Last Modified: 01-30-2024 |
6.11:8.1.0 |
Doc ID: RM100000001EXKN |
Model Year Start: 2019 |
Model: RAV4 |
Prod Date Range: [11/2018 -
] |
Title: PARKING BRAKE: ELECTRIC PARKING BRAKE SYSTEM (w/ Vacuum Brake Booster): C13B800; Electric Parking Brake Actuator; 2019 - 2024 MY RAV4 RAV4 HV [11/2018 - ] |
DTC
|
C13B800
|
Electric Parking Brake Actuator
|
DESCRIPTION
DTC No.
|
Detection Item
|
DTC Detection Condition
|
Trouble Area
|
Memory
|
Note
|
C13B800
|
Electric Parking Brake Actuator
|
|
-
Parking brake actuator assembly
-
Rear brake
|
DTC stored
|
An electric parking brake system malfunction is displayed on the multi-information display.
|
DTC Detection Conditions
|
Vehicle Condition
|
Pattern 1
|
Pattern 2
|
Diagnosis Condition
|
Electric parking brake operating
|
○
|
○
|
Malfunction Status
|
Free spinning detected
|
○
|
-
|
Repeated slipping detected
|
-
|
○
|
Detection Time
|
-
|
-
|
Number of Trips
|
1 trip
|
1 trip
|
CAUTION / NOTICE / HINT
NOTICE:
-
Although DTC C13B800 may be stored after entering pad replacement mode, this is not a malfunction.
-
Although DTC C13B800 may be stored after forcibly releasing the parking brake, this is not a malfunction.
-
The electric parking brake may still operate up to 20 seconds after the ignition switch is turned off. Before disconnecting connectors or fuses, turn the ignition switch off and wait 20 seconds or more.
-
After replacing the skid control ECU (brake actuator assembly), perform acceleration sensor zero point calibration and store system information memorization.
Click here
-
When replacing the skid control ECU (brake actuator assembly), operate the electric parking brake switch (integration control and panel assembly) as the parking brake indicator light blinks when the ignition switch is first turned to ON.
PROCEDURE
(a) Using the Techstream, check for DTCs other than DTC C13B800.
Chassis > Brake/EPB > Trouble Codes
Result
|
Proceed to
|
Only DTC C13B800 is output
|
A
|
DTCs other than C13B800 are output
|
B
|
A
|
|
|
2.
|
ELECTRIC PARKING BRAKE OPERATION CHECK
|
(a) With the wheels not contacting the ground, check the condition of the rear wheels when the electric parking brake is operating and not operating.
Click here
NEXT |
|
REPAIR OR REPLACE ABNORMAL WHEELS
|
|