Last Modified: 01-30-2024 |
6.11:8.1.0 |
Doc ID: RM100000001F4QT |
Model Year Start: 2019 |
Model: RAV4 |
Prod Date Range: [11/2018 - 08/2020] |
Title: A25A-FKS (ENGINE CONTROL): SFI SYSTEM (w/ Canister Pump Module): BASIC INSPECTION; 2019 - 2020 MY RAV4 [11/2018 - 08/2020] |
CAUTION / NOTICE / HINT
When a malfunction is not confirmed by the DTC check, troubleshooting should be carried out for all circuits considered to be possible causes of the problem. In many cases, by carrying out the basic engine check shown in the following procedure, the location of the problem can be found quickly and efficiently. Therefore, using this check is essential when troubleshooting the engine.
PROCEDURE
NOTICE:
Carry out this check with the engine stopped and the ignition switch off.
Result
|
Proceed to
|
11 V or higher
|
OK
|
Below 11 V
|
NG
|
NG |
|
CHARGE OR REPLACE BATTERY
|
OK
|
|
|
2.
|
CHECK WHETHER ENGINE CRANKS
|
OK
|
|
|
3.
|
CHECK WHETHER ENGINE STARTS
|
OK
|
|
|
4.
|
CHECK AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY
|
(a) Visually check that the air cleaner filter element sub-assembly is not excessively contaminated with dirt or oil.
NG |
|
REPLACE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY
|
OK
|
|
|
(a) Check the engine idle speed.
Click here
NG |
|
PROCEED TO PAGE AND CONTINUE TO TROUBLESHOOT
|
OK
|
|
|
(a) Check the fuel pressure.
Click here
NG |
|
PROCEED TO PAGE AND CONTINUE TO TROUBLESHOOT
|
OK
|
|
|
(a) Perform a spark test.
Click here
NG |
|
PROCEED TO PAGE AND CONTINUE TO TROUBLESHOOT
|
|