Last Modified: 01-30-2024 6.11:8.1.0 Doc ID: RM100000001F9LR
Model Year Start: 2019 Model: RAV4 Prod Date Range: [11/2018 -           ]
Title: AUDIO / VIDEO: NOISE FILTER: ON-VEHICLE INSPECTION; 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]

ON-VEHICLE INSPECTION

PROCEDURE

1. INSPECT RADIO SETTING CONDENSER

(a) With the radio setting condenser installed, check that there is no looseness or other abnormalities.

(b) Measure the resistance of the radio setting condenser according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

1 - Body ground
  • Power switch off
  • Window defogger off

Below 1 Ω

*a

Radio Setting Condenser

(c) Remove the bolt.

(d) Detach the clamp and disconnect the radio setting condenser with wire harness from the vehicle body.

(e) Measure the resistance and voltage of the radio setting condenser according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

2 - 3
  • Power switch off
  • Window defogger off

10 kΩ or higher

Standard Voltage:

Tester Connection

Condition

Specified Condition

2 - Body ground
  • Power switch on (IG)
  • Window Defogger turned off

Below 1 V

2 - Body ground
  • Power switch on (IG)
  • Window Defogger turned on

11 to 14 V

*a

Radio Setting Condenser