Last Modified: 01-30-2024 |
6.11:8.1.0 |
Doc ID: RM100000001FAHZ |
Model Year Start: 2019 |
Model: RAV4 |
Prod Date Range: [11/2018 -
] |
Title: PARK ASSIST / MONITORING: BLIND SPOT MONITOR SYSTEM: C1AB8; Destination Information Undefined; 2019 - 2024 MY RAV4 RAV4 HV [11/2018 - ] |
DTC
|
C1AB8
|
Destination Information Undefined
|
DESCRIPTION
This DTC is stored when correct destination information is not sent from the main body ECU (multiplex network body ECU) and destination information cannot be confirmed after a blind spot monitor sensor has been replaced.
DTC No.
|
Detection Item
|
DTC Detection Condition
|
Trouble Area
|
C1AB8
|
Destination Information Undefined
|
The blind spot monitor sensor cannot communicate with the main body ECU
|
-
CAN communication system
-
Main body ECU (multiplex network body ECU)
-
Blind spot monitor sensor RH
-
Blind spot monitor sensor LH
|
CAUTION / NOTICE / HINT
PROCEDURE
(a) Check for CAN communication system DTCs.
for Gasoline Model
Click here
for HV Model
Click here
OK:
CAN communication system DTCs are not output.
NG |
|
GO TO CAN COMMUNICATION SYSTEM
for Gasoline Model
Click here
for HV Model
Click here
|
OK
|
|
|
2.
|
REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)
|
(a) Replace the main body ECU (multiplex network body ECU) with a new one.
Click here
NEXT
|
|
|
(a) Recheck for DTCs and check if the same DTC is output again.
Click here
Body Electrical > Blind Spot Monitor Master > Trouble Codes
Body Electrical > Blind Spot Monitor Slave > Trouble Codes
Result
|
Proceed to
|
No DTCs are output.
|
A
|
DTC C1AB8 is output ("Blind Spot Monitor Master").
|
B
|
DTC C1AB8 is output ("Blind Spot Monitor Slave").
|
C
|
A |
|
END (MAIN BODY ECU [MULTIPLEX NETWORK BODY ECU] WAS DEFECTIVE)
|
|