| Last Modified: 01-30-2024 | 6.11:8.1.0 | Doc ID: RM100000001FAI0 |
| Model Year Start: 2019 | Model: RAV4 | Prod Date Range: [11/2018 - ] |
| Title: PARK ASSIST / MONITORING: BLIND SPOT MONITOR SYSTEM: C1ABB; Blind Spot Monitor Master Module Beam Axis Inspection Incomplete; 2019 - 2024 MY RAV4 RAV4 HV [11/2018 - ] | ||
|
DTC |
C1ABB |
Blind Spot Monitor Master Module Beam Axis Inspection Incomplete |
DESCRIPTION
This DTC is stored when a beam axis adjustment has not been performed for the blind spot monitor sensor LH.
HINT:
This DTC is always stored after replacing a blind spot monitor sensor. The purpose of this DTC is to ensure that a beam axis adjustment is performed. Completing the beam axis adjustment after replacing a blind spot monitor sensor prevents this DTC from being output.
|
DTC No. |
Detection Item |
DTC Detection Condition |
Trouble Area |
|---|---|---|---|
|
C1ABB |
Blind Spot Monitor Master Module Beam Axis Inspection Incomplete |
A beam axis adjustment has not been performed |
Blind spot monitor sensor LH |
PROCEDURE
|
1. |
PERFORM BLIND SPOT MONITOR BEAM AXIS ADJUSTMENT |
(a) Perform the Blind Spot Monitor Beam Axis Adjustment using the Techstream.
Body Electrical > Blind Spot Monitor Master > Utility
|
Tester Display |
|---|
|
BSM Master Beam Axis Adjustment |
HINT:
Refer to Blind Spot Monitor Beam Axis Confirmation.
Click here
![2019 - 2024 MY RAV4 RAV4 HV [11/2018 - ]; PARK ASSIST / MONITORING: BLIND SPOT MONITOR SENSOR: ADJUSTMENT](/t3Portal/stylegraphics/info.gif)
| NEXT |
|
END |
|
|