Last Modified: 01-30-2024 |
6.11:8.1.0 |
Doc ID: RM100000001FAI8 |
Model Year Start: 2019 |
Model: RAV4 |
Prod Date Range: [11/2018 -
] |
Title: PARK ASSIST / MONITORING: BLIND SPOT MONITOR SYSTEM: U1331; Software Incompatibility with Body Control Module "B"; 2019 - 2024 MY RAV4 RAV4 HV [11/2018 - ] |
DTC
|
U1331
|
Software Incompatibility with Body Control Module "B"
|
DESCRIPTION
This DTC is stored when the destination information of the main body ECU (multiplex network body ECU) does not match that of the blind spot monitor sensors.
DTC No.
|
Detection Item
|
DTC Detection Condition
|
Trouble Area
|
U1331
|
Software Incompatibility with Body Control Module "B"
|
Destination information of the main body ECU and blind spot monitor sensor do not match
|
-
Main body ECU (multiplex network body ECU)
-
Blind spot monitor sensor RH
-
Blind spot monitor sensor LH
|
CAUTION / NOTICE / HINT
PROCEDURE
1.
|
CONFIRM PART NUMBER (MAIN BODY ECU [MULTIPLEX NETWORK BODY ECU])
|
(a) Check the main body ECU (multiplex network body ECU) part number.
(1) Check if the part number of the main body ECU (multiplex network body ECU) installed to the vehicle is correct.
OK:
The part number is correct.
OK
|
|
|
(a) Turn the ignition switch off.
(b) Turn the ignition switch to ON.
(c) Recheck for DTCs and check if the same DTC is output again.
Click here
Body Electrical > Blind Spot Monitor Master > Trouble Codes
Body Electrical > Blind Spot Monitor Slave > Trouble Codes
Result
|
Proceed to
|
No DTCs are output.
|
A
|
DTC U1331 is output ("Blind Spot Monitor Master").
|
B
|
DTC U1331 is output ("Blind Spot Monitor Slave").
|
C
|
|