Last Modified: 01-30-2024 |
6.11:8.1.0 |
Doc ID: RM100000001FAO1 |
Model Year Start: 2019 |
Model: RAV4 |
Prod Date Range: [11/2018 -
] |
Title: HEATING / AIR CONDITIONING: BLOWER UNIT: REMOVAL; 2019 - 2024 MY RAV4 RAV4 HV [11/2018 - ] |
REMOVAL
CAUTION / NOTICE / HINT
HINT:
Before removing the blower assembly, set the air conditioning to recirculation mode.
PROCEDURE
1. REMOVE AIR CONDITIONING UNIT ASSEMBLY
(a) for A25A-FXS:
Click here
(b) for A25A-FKS:
Click here
2. REMOVE NO. 2 AIR DUCT (for TMC Made)
(b) Detach the claw to remove the No. 2 air duct.
NOTICE:
-
Be careful not to deform or damage the lower heater case of the air conditioner unit assembly when removing the No. 2 air duct.
-
If the fitting part of the No. 2 air duct has been cracked or deformed during removal, make sure to replace the air duct with a new one. Failure to do so may cause the No. 2 air duct to fall off or noise to occur.
3. REMOVE NO. 1 AIR DUCT SUB-ASSEMBLY (for TMMC Made)
HINT:
Use the same procedure described as for the No. 2 air duct (for TMC Made).
4. REMOVE BLOWER ASSEMBLY
(a) Disconnect the connector.
|
|
(b) Detach the clamp and guide.
(d) Detach the claw and guide and remove the blower assembly.
|