Last Modified: 01-30-2024 6.11:8.1.0 Doc ID: RM100000001FAO3
Model Year Start: 2019 Model: RAV4 Prod Date Range: [11/2018 -           ]
Title: HEATING / AIR CONDITIONING: BLOWER UNIT: REASSEMBLY; 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]

REASSEMBLY

PROCEDURE

1. INSTALL NO. 1 BLOWER DAMPER SERVO SUB-ASSEMBLY

(a) Connect the 2 links of the blower assembly to the 2 holes on the plate of the No. 1 blower damper servo sub-assembly as shown in the illustration.

*a

Link

*b

Hole

(b) Attach the guide.

(c) Install the No. 1 blower damper servo sub-assembly with the 2 screws.

2. INSTALL BLOWER MOTOR WITH FAN SUB-ASSEMBLY

(a) Install the blower motor with fan sub-assembly with the 3 screws.

NOTICE:

Replace the blower motor with fan sub-assembly if it has been dropped or subjected to a severe impact.

3. INSTALL CLEAN AIR FILTER

(a) Attach the guide on the cutout side of the air filter case and then attach the guide as shown in the illustration to install the clean air filter.

NOTICE:

  • Do not apply excessive force to the filter medium, as doing so may damage it.
  • Make sure that the "UP" marks are facing the correct direction before installing the clean air filter.
  • Make sure that there is no clearance between the clean air filter and air filter case and that the clean air filter is not deformed.

*a

Cutout

*b

Rib

Install in this Direction (1)

Install in this Direction (2)

4. INSTALL AIR FILTER CASE

(a) Install the air filter case.

NOTICE:

Insert so that the UP mark arrow is pointing upwards.

5. INSTALL AIR FILTER COVER PLATE

(a) Insert the guide in the direction indicated by the arrow shown in the illustration.

Install in this Direction (1)

Install in this Direction (2)

(b) Rotate in the direction indicated by the arrow shown in the illustration, attach the claw and install the air filter cover plate in the order shown in the illustration.

NOTICE:

  • Insert it with the arrow of the UP mark facing upward.
  • Insert the claw until a "click" sound is heard.