| Last Modified: 01-30-2024 | 6.11:8.1.0 | Doc ID: RM100000001FAP2 |
| Model Year Start: 2019 | Model: RAV4 | Prod Date Range: [11/2018 - ] |
| Title: HEATING / AIR CONDITIONING: AMBIENT TEMPERATURE SENSOR: REMOVAL; 2019 - 2024 MY RAV4 RAV4 HV [11/2018 - ] | ||
REMOVAL
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during cooler thermistor (ambient temperature sensor) removal/installation are shown below.
Necessary Procedures After Parts Removed/Installed/Replaced (for HV Model)
|
Replaced Part or Performed Procedure |
Necessary Procedures |
Effect/Inoperative Function when Necessary Procedures are not Performed |
Link |
|---|---|---|---|
|
Front bumper assembly (Including removal and installation) |
Front television camera view adjustment |
Panoramic view monitor system (for HV Model) |
|
Necessary Procedures After Parts Removed/Installed/Replaced (for Gasoline Model)
|
Replaced Part or Performed Procedure |
Necessary Procedures |
Effect/Inoperative Function when Necessary Procedures are not Performed |
Link |
|---|---|---|---|
|
Front bumper assembly (Including removal and installation) |
Front television camera view adjustment |
Panoramic view monitor system (for Gasoline Model) |
|
PROCEDURE
1. REMOVE FRONT BUMPER ASSEMBLY (w/o Grille Shutter)
(a) for Off Road Package:
Click here
![2019 MY RAV4 RAV4 HV [11/2018 - 02/2019]; EXTERIOR PANELS / TRIM: FRONT BUMPER (for Off Road Package): REMOVAL](/t3Portal/stylegraphics/info.gif)
(b) except Off Road Package:
Click here
2. REMOVE RADIATOR SHUTTER SUB-ASSEMBLY (w/ Grille Shutter)
Click here
3. REMOVE COOLER THERMISTOR (AMBIENT TEMPERATURE SENSOR)
(a) Disconnect the connector.
|
*A |
w/o Grille Shutter |
*B |
w/ Grille Shutter |
(b) Detach the clamp and remove the cooler thermistor (ambient temperature sensor).
|
|