| Last Modified: 01-30-2024 | 6.11:8.1.0 | Doc ID: RM100000001FATN |
| Model Year Start: 2019 | Model: RAV4 | Prod Date Range: [11/2018 - ] |
| Title: AUDIO / VIDEO: FRONT DOOR SPEAKER: INSTALLATION; 2019 - 2024 MY RAV4 RAV4 HV [11/2018 - ] | ||
INSTALLATION
CAUTION / NOTICE / HINT
HINT:
- Use the same procedure for the RH and LH sides.
- The procedure listed below is for the LH side.
PROCEDURE
1. INSTALL FRONT NO. 1 SPEAKER ASSEMBLY
NOTICE:
Do not touch the cone part of the speaker.
(a) Install a nose piece to an air riveter or hand riveter. Then insert the mandrel part of a new φ4.9 mm (0.193 in.) waterproof rivet into the nose piece.
(b) Using an air riveter or hand riveter, install the front No. 1 speaker assembly with 3 new rivets in the order shown in the illustration.
|
*A |
w/o Woofer |
*B |
w/ Woofer |
|
Rivet |
|
Connector |
NOTICE:
-
Do not pry the rivet with the riveter, as this will cause damage to the riveter and mandrel.
*1
Mandrel
*2
Riveter
*a
INCORRECT
*b
CORRECT
-
Confirm that the rivets are seated properly against the speaker.
*1
Riveter
*a
INCORRECT
*b
CORRECT
- Do not tilt the riveter when installing the rivet to the speaker.
- Do not leave any space between the rivet head and speaker.
-
Do not leave any space between the speaker and door. Firmly hold together the 2 items while installing the rivet.
*1
Riveter
*a
INCORRECT
*b
CORRECT
(c) Connect the connector.
2. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH
Click here
![2019 - 2020 MY RAV4 RAV4 HV [11/2018 - 08/2020]; DOOR / HATCH: FRONT DOOR: REASSEMBLY+](/t3Portal/stylegraphics/info.gif)
3. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side)
Click here
4. INSTALL MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side)
Click here
5. INSTALL FRONT DOOR ASSIST GRIP COVER LH
Click here
6. INSTALL FRONT DOOR INSIDE HANDLE BEZEL LH
Click here
|
|