Last Modified: 01-30-2024 6.11:8.1.0 Doc ID: RM100000001FE4O
Model Year Start: 2019 Model: RAV4 Prod Date Range: [11/2018 -           ]
Title: SEAT BELT: REAR SEAT INNER BELT ASSEMBLY: INSPECTION; 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]

INSPECTION

PROCEDURE

1. INSPECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH

(a) for LH:

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

5 (LBR+) - 4 (LBR-)

Seat belt unfastened

Below 1 Ω

Seat belt fastened

10 kΩ or higher

If the result is not as specified, replace the rear seat inner with center belt assembly LH.

*a

Component without harness connected

(Rear Seat Inner with Center Belt Assembly LH)

(b) for CENTER:

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

4 (CBR+) - 3 (CBR-)

Seat belt unfastened

Below 1 Ω

Seat belt fastened

10 kΩ or higher

If the result is not as specified, replace the rear seat inner with center belt assembly LH.

*a

Component without harness connected

(Rear Seat Inner with Center Belt Assembly LH)

2. INSPECT REAR SEAT INNER BELT ASSEMBLY

(a) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

5 (RBR+) - 4 (RBR-)

Seat belt unfastened

Below 1 Ω

Seat belt fastened

10 kΩ or higher

If the result is not as specified, replace the rear seat inner belt assembly.

*a

Component without harness connected

(Rear Seat Inner Belt Assembly)