Last Modified: 01-30-2024 |
6.11:8.1.0 |
Doc ID: RM100000001FE4V |
Model Year Start: 2019 |
Model: RAV4 |
Prod Date Range: [11/2018 -
] |
Title: SEAT BELT: REAR CENTER SEAT OUTER BELT ASSEMBLY: INSTALLATION; 2019 - 2024 MY RAV4 RAV4 HV [11/2018 - ] |
INSTALLATION
CAUTION / NOTICE / HINT
CAUTION:
-
Wear protective gloves. Sharp areas on the parts may injure your hands.
-
There is risk of injury.
PROCEDURE
1. INSPECT REAR CENTER SEAT OUTER BELT ASSEMBLY
Click here
2. INSTALL REAR CENTER SEAT OUTER BELT ASSEMBLY
(b) Install the rear center seat outer belt assembly with the nut.
Torque:
42 N·m {428 kgf·cm, 31 ft·lbf}
3. INSTALL SEPARATE TYPE REAR SEATBACK COVER WITH PAD
Click here
4. INSTALL REAR CENTER SEAT ARMREST ASSEMBLY
Click here
5. INSTALL CENTER ARMREST HINGE COVER
Click here
6. INSTALL REAR SEATBACK BOARD SUB-ASSEMBLY RH
Click here
7. INSTALL REAR UPPER SEATBACK LOCK BEZEL RH
Click here
8. INSTALL REAR LOWER SEATBACK LOCK BEZEL RH
Click here
9. INSTALL SEAT BELT ANCHOR COVER CAP
Click here
10. INSTALL REAR SEAT SHOULDER BELT COVER
Click here
11. INSTALL REAR CENTER SEAT HEADREST ASSEMBLY
(a) Install the rear center seat headrest assembly.
12. INSTALL REAR SEAT HEADREST ASSEMBLY
(a) Install the rear seat headrest assembly.
13. INSTALL REAR SEATBACK ASSEMBLY RH
Click here
14. INSTALL REAR CENTER SEAT OUTER BELT ASSEMBLY (FLOOR ANCHOR)
(a) Install the floor anchor of rear center seat outer belt assembly with the nut.
Torque:
42 N·m {428 kgf·cm, 31 ft·lbf}
NOTICE:
Do not allow the floor anchor of the rear center seat outer belt assembly to overlap the protruding part.
|
|
(b) Check that the ELR locks.
(1) With the rear center seat outer belt assembly installed to the vehicle, check that the belt locks when it is pulled out quickly.
15. INSTALL REAR SEAT CUSHION LOCK HOOK
Click here
16. INSTALL BENCH TYPE REAR SEAT CUSHION ASSEMBLY
Click here
17. INSPECT SEAT HEATER SYSTEM (w/ Seat Heater System)
Click here
|