| Last Modified: 01-30-2024 | 6.11:8.1.0 | Doc ID: RM100000001FFBZ |
| Model Year Start: 2019 | Model: RAV4 | Prod Date Range: [11/2018 - 12/2021] |
| Title: CRUISE CONTROL: FRONT RADAR SENSOR SYSTEM: TERMINALS OF ECU; 2019 - 2021 MY RAV4 RAV4 HV [11/2018 - 12/2021] | ||
TERMINALS OF ECU
NOTICE:
- Turning the ignition switch to ON with connectors disconnected may cause DTCs to be stored. Make sure to clear the DTCs after inspection has been performed.
- Do not apply excessive force to the millimeter wave radar sensor assembly connector.
CHECK MILLIMETER WAVE RADAR SENSOR ASSEMBLY
(a) Measure the voltage and resistance according to the value(s) in the table below.
|
Terminal No. (Symbol) |
Wiring Color |
Terminal Description |
Condition |
Specified Condition |
|---|---|---|---|---|
|
*1: w/o Stop and Start System
*2: w/ Stop and Start System |
||||
|
B9-8 (IGB) - B9-1 (SGND) |
SB - W-B |
Power source |
Ignition switch ON |
11 to 14 V*1 10.5 to 16 V*2 |
|
Ignition switch off |
Below 1 V |
|||
|
B9-1 (SGND) - Body ground |
W-B - Body ground |
Ground |
Always |
Below 1 Ω |
|
|