A25A-FXS (ENGINE CONTROL): SFI SYSTEM (w/o Canister Pump Module): REGISTRATION; 2019 - 2020 MY RAV4 HV [11/2018

Last Modified: 01-30-2024	6.11:8.1.0	Doc ID: RM100000001FHIN
Model Year Start: 2019	Model: RAV4 HV	Prod Date Range: [11/2018 - 08/2020]
Title: A25A-FXS (ENGINE CONTROL): SFI SYSTEM (w/o Canister Pump Module): REGISTRATION; 2019 - 2020 MY RAV4 HV [11/2018 - 08/2020]

REGISTRATION

CAUTION / NOTICE / HINT

PROCEDURE

1. VIN OR FRAME NUMBER

NOTICE:

The Vehicle Identification Number (VIN) or Frame Number must be written to a replacement ECM.

(a) DESCRIPTION

HINT:

This registration section consists of 2 parts: Read VIN or Frame Number and Write VIN or Frame Number.

(1) Read VIN or Frame Number: This procedure allows the VIN or Frame Number stored in the ECM to be read in order to confirm that the VINs or Frame Numbers, provided on the vehicle body and stored in the vehicle ECM, are the same.

(2) Write VIN or Frame Number: This procedure allows the VIN or Frame Number to be written to the ECM. If the ECM is replaced, or the ECM VIN or Frame Number and vehicle VIN or Frame Number do not match, the VIN or Frame Number can be registered, or overwritten in the ECM by following this procedure.

(b) READ VIN or Frame Number

(1) Confirm the vehicle VIN or Frame Number.

(2) Connect the Techstream to the DLC3.

(3) Turn the power switch on (IG).

(4) Turn the Techstream on.

(5) Enter the following menus: Powertrain / Engine / Utility / VIN / VIN Read.

Powertrain > Engine > Utility

Tester Display
VIN

(6) According to the display on the Techstream, read the frame number or VIN or Frame Number stored in the ECM.

(1) Confirm the vehicle VIN or Frame Number.

(2) Connect the Techstream to the DLC3.

(3) Turn the power switch on (IG).

(4) Turn the Techstream on.

(5) Enter the following menus: Powertrain / Engine / Utility / VIN / VIN Write.

Powertrain > Engine > Utility

Tester Display
VIN

(6) According to the display on the Techstream, write the vehicle frame number or VIN or Frame Number to the ECM.