| Last Modified: 01-30-2024 | 6.11:8.1.0 | Doc ID: RM100000001FJ0E |
| Model Year Start: 2019 | Model: RAV4 | Prod Date Range: [11/2018 - ] |
| Title: WINDOW / GLASS: POWER WINDOW CONTROL SYSTEM: Auto Up Operation does not Fully Close Power Window (Jam Protection Function is Activated); 2019 - 2024 MY RAV4 RAV4 HV [11/2018 - ] | ||
|
Auto Up Operation does not Fully Close Power Window (Jam Protection Function is Activated) |
DESCRIPTION
If a door glass or a power window regulator motor assembly does not operate smoothly, the jam protection function may be triggered automatically, resulting in the auto up operation being unable to fully close the window.
CAUTION / NOTICE / HINT
NOTICE:
-
If a power window regulator motor assembly has been replaced with a new one, initialize the power window control system.
Click here
![2019 - 2024 MY RAV4 RAV4 HV [11/2018 - ]; WINDOW / GLASS: POWER WINDOW CONTROL SYSTEM: INITIALIZATION](/t3Portal/stylegraphics/info.gif)
-
If a power window regulator motor assembly and front door window regulator sub-assembly have been removed and installed, or if a power window regulator motor assembly was reused when a door glass or door glass run was replaced, initialize the power window control system.
Click here
HINT:
This symptom may occur for any of the windows.
PROCEDURE
|
1. |
PERFORM INITIALIZATION (APPLICABLE LOCATION) |
(a) Initialize the power window regulator motor assembly (applicable location).
Click here
|
|
2. |
CHECK POWER WINDOW CONTROL SYSTEM (AUTO UP / DOWN FUNCTION [APPLICABLE LOCATION]) |
(a) Check that each power window moves when the auto up and down function of the multiplex network master switch assembly, power window regulator switch assembly or rear power window regulator switch assembly (LH or RH) is operated.
Click here
OK:
Auto up and down function is normal (applicable location).
| OK |
|
END (PROBLEM DUE TO INITIALIZATION FAILURE) |
|
|
3. |
CHECK WINDOW GLASS SLIDING MOVEMENT (APPLICABLE LOCATION) |
(a) Remove the door window regulator.
-
for Front Door:
Click here
for Rear Door:
Click here
(b) Install the window glass to the door glass run.
-
for Front Door:
Click here
for Rear Door:
Click here
(c) Check if the door window regulator operates smoothly.
(d) Check that the window glass slides smoothly when sliding it up by hand.
CAUTION:
Perform initialization again.
HINT:
Ensure the following:
- The window glass fits with the glass run without improper contact or deformation.
- Foreign matter is not caught in the glass run.
- The glass run is not misaligned.
- The belt moulding or roof side rail weatherstrip is not caught.
- The glass is not tilted and does not catch.
OK:
Door window glass slides smoothly.
|
Result |
Proceed to |
|---|---|
|
OK (Driver door power window) |
A |
|
OK (Front passenger door power window) |
B |
|
OK (Rear LH door power window) |
C |
|
OK (Rear RH door power window) |
D |
|
NG |
E |
| A |
|
REPLACE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH
|
| B |
|
REPLACE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY RH
|
| C |
|
REPLACE REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY LH
|
| D |
|
REPLACE REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY RH
|
| E |
|
FIT WINDOW GLASS CORRECTLY (REMOVE FOREIGN MATTER CAUSING IMPROPER FIT OR REPLACE PARTS) |
|
|