| Last Modified: 01-30-2024 | 6.11:8.1.0 | Doc ID: RM100000001FJ1T |
| Model Year Start: 2019 | Model: RAV4 | Prod Date Range: [11/2018 - ] |
| Title: WIPER / WASHER: WIPER AND WASHER SYSTEM: CUSTOMIZE PARAMETERS; 2019 - 2024 MY RAV4 RAV4 HV [11/2018 - ] | ||
CUSTOMIZE PARAMETERS
CUSTOMIZE WIPER AND WASHER SYSTEM
NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
HINT:
The following items can be customized.
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Customize Setting / Wiper.
(e) Select the setting by referring to the table below.
Wiper
|
Tester Display |
Description |
Default |
Setting |
ECU |
|---|---|---|---|---|
|
Auto Wiper |
Function to enable AUTO wiper operation (w/ Rain Sensor) |
Avail |
0:Avail,1:Not Avl |
Rain Sensor |
|
Rear Wiper Stop in Back Door/Trunk Lid Open |
Function to enable the back door open linked rear wiper suspend function |
Available |
0:Not Available,1:Available |
Main body ECU (Multiplex network body ECU) |
|
Rear Wiper Washer Function |
Function to enable the rear washer linked rear wiper operation function |
Available |
0:Not Available,1:Available |
Main body ECU (Multiplex network body ECU) |
|
Auto Rear Wiper in Reverse Setting |
Function to enable the R shift position linked rear wiper operation function |
Once |
00:Not Available,10:Once,11:Continuance |
Main body ECU (Multiplex network body ECU) |
|
|