Last Modified: 01-30-2024 6.11:8.1.0 Doc ID: RM100000001FJ4A
Model Year Start: 2019 Model: RAV4 Prod Date Range: [11/2018 -           ]
Title: AXLE AND DIFFERENTIAL: DIFFERENTIAL MOUNT CUSHION: INSTALLATION; 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]

INSTALLATION

PROCEDURE

1. INSTALL REAR NO. 1 DIFFERENTIAL MOUNT CUSHION

(a) Using SST, install a new rear No. 1 differential mount cushion.

SST: 09316-12010

SST: 09570-24011

*1

Rear Suspension Member Sub-assembly

-

-

*a

-3° to 3°

*b

9.8 to 10.8 mm (0.3858 to 0.4252 in.)

*c

Protrusion

*d

Turn

*e

Hold

-

-

Turning Direction

Front of Vehicle

SST Bolt Position

-

-

NOTICE:

  • Make sure that the rear No. 1 differential mount cushion is aligned within 3° from the center.
  • Install the rear No. 1 differential mount cushion so that the protrusion is positioned as shown in the illustration.
  • Be sure to use the correct combination of SST.
  • Before using SST, apply grease to SST bolt.
  • Temporarily install the rear No. 1 differential mount cushion to the rear suspension member sub-assembly in order to prevent it from tilting, and then install SST.
  • Make sure that SST contacts the entire circumference of the rear No. 1 differential mount cushion.
  • Do not tilt the bolts of SST.

2. INSTALL TORQUE VECTORING DIFFERENTIAL CARRIER ASSEMBLY (for Torque Vectoring Differential)

Click here 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]; AXLE AND DIFFERENTIAL: REAR DIFFERENTIAL CARRIER ASSEMBLY (for Torque Vectoring Differential): INSTALLATION

3. INSTALL REAR DIFFERENTIAL CARRIER ASSEMBLY (except Torque Vectoring Differential)

Click here 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]; AXLE AND DIFFERENTIAL: REAR DIFFERENTIAL CARRIER ASSEMBLY: INSTALLATION