| Last Modified: 05-08-2025 | 6.11:8.1.0 | Doc ID: RM100000001FK8S |
| Model Year Start: 2019 | Model: RAV4 | Prod Date Range: [11/2018 - 08/2020] |
| Title: STEERING COLUMN: STEERING WHEEL: INSTALLATION; 2019 - 2020 MY RAV4 RAV4 HV [11/2018 - 08/2020] | ||
INSTALLATION
PROCEDURE
1. INSTALL NO. 1 TRANSMISSION SHIFT SWITCH ASSEMBLY (w/ Shift Paddle Switch)
Click here
![2019 - 2020 MY RAV4 [11/2018 - 08/2020]; UB80F (AUTOMATIC TRANSMISSION / TRANSAXLE): SHIFT PADDLE SWITCH: INSTALLATION+](/t3Portal/stylegraphics/info.gif)
2. INSTALL NO. 2 TRANSMISSION SHIFT SWITCH ASSEMBLY (w/ Shift Paddle Switch)
HINT:
Use the same procedure described for the No. 1 transmission shift switch assembly.
3. ADJUST SPIRAL CABLE
Click here
4. INSTALL STEERING WHEEL ASSEMBLY
(a) Align the matchmarks on the steering wheel assembly and steering main shaft.
(b) Install the steering wheel set bolt.
Torque:
62 N·m {632 kgf·cm, 46 ft·lbf}
5. INSTALL STEERING PAD SWITCH ASSEMBLY
Click here
6. INSTALL HORN BUTTON ASSEMBLY
Click here
7. INSPECT STEERING WHEEL CENTER POINT
8. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL
-
for A25A-FKS: Click here
-
for A25A-FXS: Click here
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
Click here
9. INSTALL BATTERY HOLE COVER (for HV Model)
Click here
10. INSTALL REAR NO. 2 FLOOR BOARD (for HV Model)
Click here
11. INSTALL DECK BOARD ASSEMBLY (for HV Model)
Click here
|
|