OPERATION CHECK

CHECK ELECTRICAL REMOTE CONTROL MIRROR FUNCTION

(a) Turn the ignition switch to ON.

(b) With the mirror select switch L switch on, check that the outer rear view mirror assembly LH surface moves up, down, left and right normally.

(c) With the mirror select switch R switch on, check that the outer rear view mirror assembly RH surface moves up, down, left and right normally.

CHECK POWER RETRACTABLE MIRROR FUNCTION (w/ Retract Mirror)

(a) Turn the ignition switch to ACC.

(b) When the outer rear view mirror assembly LH and outer rear view mirror assembly RH are in the driving position, press the mirror retract switch in the outer mirror switch assembly and check that they move to the retracted position.

HINT:

If both mirrors are moved to the driving/retracted position by hand, the mirrors will not retract/return with the first switch operation. Another switch operation is required to retract/return the mirrors.

(c) When the outer rear view mirror assembly LH and outer rear view mirror assembly RH are in the retracted position, press the mirror retract switch in the outer mirror switch assembly and check that they move to the driving position.

HINT:

If both mirrors are moved to the driving/retracted position by hand, the mirrors will not retract/return with the first switch operation. Another switch operation is required to retract/return the mirrors.

(d) When the outer rear view mirror assembly LH and outer rear view mirror assembly RH are in the driving position, move either of them forward by hand, and then press the mirror retract switch in the outer mirror switch assembly and check that both outer rear view mirror assemblies move to the retracted position.

(e) When the outer rear view mirror assembly LH and outer rear view mirror assembly RH are in the driving position, move either of them to the retracted position by hand, and then press the mirror retract switch in the outer mirror switch assembly and check that the other outer rear view mirror assembly moves to the retracted position.

(f) When the outer rear view mirror assembly LH and outer rear view mirror assembly RH are in the retracted position, move either of them to the driving position by hand, and then press the mirror retract switch in the outer mirror switch assembly and check that the other outer rear view mirror assembly moves to the driving position.

(g) While the outer rear view mirror assemblies are operating, stop either outer rear view mirror assembly by hand and check that its operation stops. Then press the mirror retract switch in the outer mirror switch assembly and check that the operation resumes.

CHECK MIRROR HEATER (w/ Mirror Heater)

NOTICE:

If the auxiliary battery voltage becomes low, window defogger system operation is canceled to prioritize supplying power to the power steering system.

HINT:

The window defogger switch in the air conditioning control assembly is used for both the window defogger and mirror heater.

(a) Turn the ignition switch to ON.

(b) Check that the window defogger wire becomes warm by operating the window defogger switch (mirror heater switch) of the air conditioning control assembly.

(c) When the vehicle is stopped, confirm that the mirror heater operation stops after approximately 15 minutes.