Last Modified: 01-30-2024 6.11:8.1.0 Doc ID: RM100000001FNKQ
Model Year Start: 2019 Model: RAV4 Prod Date Range: [11/2018 - 02/2019]
Title: METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: B150819; Turn Signal/Hazard Flasher Circuit Current Above Threshold; 2019 MY RAV4 RAV4 HV [11/2018 - 02/2019]

DTC

B150819

Turn Signal/Hazard Flasher Circuit Current Above Threshold

DESCRIPTION

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

B150819

Turn Signal/Hazard Flasher Circuit Current Above Threshold

Diagnosis Condition:

  • Auxiliary battery voltage is 10 V or more

Malfunction Status:

  • Short in front turn signal light circuit
  • Short in side turn signal light circuit
  • Short in rear turn signal light circuit
  • Headlight unit assembly*1
  • Headlight ECU sub-assembly*1
  • Front turn signal light socket
  • Side turn signal light assembly*2
  • Front turn signal and parking light bulb (front turn signal bulb)*3
  • Front turn signal light bulb (front turn signal bulb)*4
  • Outer rear view mirror assembly*2
  • Rear combination light socket and wire
  • Combination meter assembly
  • Harness or connector
  • Instrument panel junction block assembly
  • *1: w/ Headlight ECU
  • *2: w/ Side Turn Signal Light
  • *3: w/ Side Marker Light
  • *4: w/o Side Marker Light

WIRING DIAGRAM

w/ Headlight ECU:

w/o Headlight ECU:

CAUTION / NOTICE / HINT

NOTICE:

  • When replacing the combination meter assembly, always replace it with a new one. If a combination meter assembly which was installed to another vehicle is used, the information stored in it will not match the information from the vehicle and a DTC may be stored.
  • Inspect the bulbs before performing the following procedure.
  • w/ Headlight ECU:

    If the headlight ECU sub-assembly LH has been replaced, it is necessary to synchronize the vehicle information and initialize the headlight ECU sub-assembly LH.

    Click here 2019 - 2021 MY RAV4 RAV4 HV [11/2018 - 12/2021]; LIGHTING (EXT): LIGHTING SYSTEM (w/ Headlight ECU without AFS): INITIALIZATION

PROCEDURE

1.

CHECK VEHICLE TYPE

(a) Check vehicle condition.

Result

Proceed to

w/ Headlight ECU

A

w/o Headlight ECU

B
B

GO TO STEP 25

A

2.

INSPECT LIGHTS

(a) Inspect the illumination of each turn signal light.

Result

Proceed to

Front turn signal light LH and side turn signal light LH do not blink.

A

Front turn signal light RH and side turn signal light RH do not blink.

B

Rear turn signal light LH does not blink.

C

Rear turn signal light RH does not blink.

D
B

GO TO STEP 12

C

GO TO STEP 20

D

GO TO STEP 23

A

3.

CHECK HARNESS AND CONNECTOR (COMBINATION METER ASSEMBLY - INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY)

(a) Disconnect the G19 combination meter assembly connector.

(b) Disconnect the 4A instrument panel junction block assembly connector.

(c) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

G19-1 (LL) or 4A-5 - Body ground

Always

10 kΩ or higher
NG

REPAIR OR REPLACE HARNESS OR CONNECTOR
OK

4.

CHECK HARNESS AND CONNECTOR (COMBINATION METER ASSEMBLY - HEADLIGHT ECU SUB-ASSEMBLY LH)

(a) Disconnect the 4F instrument panel junction block assembly connector.

(b) Clear the DTC.

Click here 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]; METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: DTC CHECK / CLEAR

Body Electrical > Combination Meter > Clear DTCs

(c) Check for DTC.

Click here 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]; METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: DTC CHECK / CLEAR

Body Electrical > Combination Meter > Trouble Codes

Result

Proceed to

DTC B150819 is output.

A

DTC B150718 is output.

B
B

GO TO STEP 7

A

5.

CHECK HARNESS AND CONNECTOR (COMBINATION METER ASSEMBLY - OUTER REAR VIEW MIRROR ASSEMBLY LH)

(a) Disconnect the 4H instrument panel junction block assembly connector.

(b) Clear the DTC.

Click here 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]; METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: DTC CHECK / CLEAR

Body Electrical > Combination Meter > Clear DTCs

(c) Check for DTC.

Click here 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]; METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: DTC CHECK / CLEAR

Body Electrical > Combination Meter > Trouble Codes

Result

Proceed to

DTC B150819 is output.

A

DTC B150718 is output.

B
B

GO TO STEP 8

A

6.

CHECK HARNESS AND CONNECTOR (COMBINATION METER ASSEMBLY - HEADLIGHT ECU SUB-ASSEMBLY LH)

(a) Disconnect the G19 combination meter assembly connector.

(b) Disconnect the A11 headlight ECU sub-assembly LH connector.

(c) Disconnect the J13 outer rear view mirror assembly LH connector.

(d) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

G19-1 (LL) or A11-11 (TNS) or J13-1 (B) - Body ground

Always

10 kΩ or higher
OK

REPLACE COMBINATION METER ASSEMBLY

NG

REPLACE INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY

7.

CHECK HEADLIGHT ECU SUB-ASSEMBLY LH

(a) Disconnect the A11 headlight ECU sub-assembly LH connector.

(b) Clear the DTC.

Click here 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]; METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: DTC CHECK / CLEAR

Body Electrical > Combination Meter > Clear DTCs

(c) Check for DTC.

Click here 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]; METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: DTC CHECK / CLEAR

Body Electrical > Combination Meter > Trouble Codes

Result

Proceed to

DTC B150819 is output.

A

DTC B150718 is output.

B
A

REPAIR OR REPLACE HARNESS OR CONNECTOR
B

GO TO STEP 9

8.

CHECK OUTER REAR VIEW MIRROR ASSEMBLY LH

(a) Disconnect the J13 outer rear view mirror assembly LH connector.

(b) Clear the DTC.

Click here 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]; METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: DTC CHECK / CLEAR

Body Electrical > Combination Meter > Clear DTCs

(c) Check for DTC.

Click here 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]; METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: DTC CHECK / CLEAR

Body Electrical > Combination Meter > Trouble Codes

Result

Proceed to

DTC B150819 is output.

A

DTC B150718 is output.

B
A

REPAIR OR REPLACE HARNESS OR CONNECTOR
B

GO TO STEP 10

9.

CHECK HEADLIGHT UNIT ASSEMBLY LH

(a) Remove the headlight unit assembly LH.

for Triple Beam Headlight:

Click here 2019 MY RAV4 RAV4 HV [11/2018 - 02/2019]; LIGHTING (EXT): HEADLIGHT ASSEMBLY (for Triple Beam Headlight): REMOVAL

for Single Beam Headlight:

Click here 2019 MY RAV4 RAV4 HV [11/2018 - 02/2019]; LIGHTING (EXT): HEADLIGHT ASSEMBLY(for Single Beam Headlight): REMOVAL

(b) Clear the DTC.

Click here 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]; METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: DTC CHECK / CLEAR

Body Electrical > Combination Meter > Clear DTCs

(c) Check for DTC.

Click here 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]; METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: DTC CHECK / CLEAR

Body Electrical > Combination Meter > Trouble Codes

Result

Proceed to

DTC B150819 is output.

A

DTC B150718 is output.

B
A

REPLACE HEADLIGHT ECU SUB-ASSEMBLY LH

B

GO TO STEP 11

10.

CHECK SIDE TURN SIGNAL LIGHT ASSEMBLY LH

(a) Disconnect the A side turn signal light assembly LH connector.

(b) Clear the DTC.

Click here 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]; METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: DTC CHECK / CLEAR

Body Electrical > Combination Meter > Clear DTCs

(c) Check for DTC.

Click here 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]; METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: DTC CHECK / CLEAR

Body Electrical > Combination Meter > Trouble Codes

Result

Proceed to

DTC B150819 is output.

A

DTC B150718 is output.

B
A

REPLACE OUTER REAR VIEW MIRROR ASSEMBLY LH

B

REPLACE SIDE TURN SIGNAL LIGHT ASSEMBLY LH

11.

CHECK FRONT TURN SIGNAL LIGHT SOCKET

(a) Disconnect the C front turn signal light socket connector.

(b) Clear the DTC.

Click here 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]; METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: DTC CHECK / CLEAR

Body Electrical > Combination Meter > Clear DTCs

(c) Check for DTC.

Click here 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]; METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: DTC CHECK / CLEAR

Body Electrical > Combination Meter > Trouble Codes

Result

Proceed to

DTC B150819 is output.

A

DTC B150718 is output.

B
A

REPLACE HEADLIGHT UNIT ASSEMBLY LH

for Triple Beam Headlight:

Click here 2019 - 2020 MY RAV4 RAV4 HV [11/2018 - 08/2020]; LIGHTING (EXT): HEADLIGHT ASSEMBLY (for Triple Beam Headlight): DISASSEMBLY

for Single Beam Headlight:

Click here 2019 MY RAV4 RAV4 HV [11/2018 - 02/2019]; LIGHTING (EXT): HEADLIGHT ASSEMBLY(for Single Beam Headlight): DISASSEMBLY

B

REPLACE FRONT TURN SIGNAL LIGHT SOCKET

for Triple Beam Headlight:

Click here 2019 - 2020 MY RAV4 RAV4 HV [11/2018 - 08/2020]; LIGHTING (EXT): HEADLIGHT ASSEMBLY (for Triple Beam Headlight): DISASSEMBLY

for Single Beam Headlight:

Click here 2019 MY RAV4 RAV4 HV [11/2018 - 02/2019]; LIGHTING (EXT): HEADLIGHT ASSEMBLY(for Single Beam Headlight): DISASSEMBLY

12.

CHECK HARNESS AND CONNECTOR (COMBINATION METER ASSEMBLY - INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY)

(a) Disconnect the G19 combination meter assembly connector.

(b) Disconnect the 4A instrument panel junction block assembly connector.

(c) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

G19-2 (LR) or 4A-4 - Body ground

Always

10 kΩ or higher
NG

REPAIR OR REPLACE HARNESS OR CONNECTOR
OK

13.

CHECK HARNESS AND CONNECTOR (COMBINATION METER ASSEMBLY - HEADLIGHT ECU SUB-ASSEMBLY RH)

(a) Disconnect the 4F instrument panel junction block assembly connector.

(b) Clear the DTC.

Click here 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]; METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: DTC CHECK / CLEAR

Body Electrical > Combination Meter > Clear DTCs

(c) Check for DTC.

Click here 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]; METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: DTC CHECK / CLEAR

Body Electrical > Combination Meter > Trouble Codes

Result

Proceed to

DTC B150819 is output.

A

DTC B150718 is output.

B
B

GO TO STEP 16

A

14.

CHECK HARNESS AND CONNECTOR (COMBINATION METER ASSEMBLY - OUTER REAR VIEW MIRROR ASSEMBLY RH)

(a) Disconnect the 4H instrument panel junction block assembly connector.

(b) Clear the DTC.

Click here 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]; METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: DTC CHECK / CLEAR

Body Electrical > Combination Meter > Clear DTCs

(c) Check for DTC.

Click here 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]; METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: DTC CHECK / CLEAR

Body Electrical > Combination Meter > Trouble Codes

Result

Proceed to

DTC B150819 is output.

A

DTC B150718 is output.

B
B

GO TO STEP 17

A

15.

CHECK HARNESS AND CONNECTOR (COMBINATION METER ASSEMBLY - HEADLIGHT ECU SUB-ASSEMBLY RH)

(a) Disconnect the G19 combination meter assembly connector.

(b) Disconnect the A12 headlight ECU sub-assembly RH connector.

(c) Disconnect the I13 outer rear view mirror assembly RH connector.

(d) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

G19-2 (LR) or A12-11 (TNS) or I13-1 (B) - Body ground

Always

10 kΩ or higher
OK

REPLACE COMBINATION METER ASSEMBLY

NG

REPLACE INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY

16.

CHECK HEADLIGHT ECU SUB-ASSEMBLY RH

(a) Disconnect the A12 headlight ECU sub-assembly RH connector.

(b) Clear the DTC.

Click here 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]; METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: DTC CHECK / CLEAR

Body Electrical > Combination Meter > Clear DTCs

(c) Check for DTC.

Click here 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]; METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: DTC CHECK / CLEAR

Body Electrical > Combination Meter > Trouble Codes

Result

Proceed to

DTC B150819 is output.

A

DTC B150718 is output.

B
A

REPAIR OR REPLACE HARNESS OR CONNECTOR
B

GO TO STEP 18

17.

CHECK OUTER REAR VIEW MIRROR ASSEMBLY RH

(a) Disconnect the I13 outer rear view mirror assembly RH connector.

(b) Clear the DTC.

Click here 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]; METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: DTC CHECK / CLEAR

Body Electrical > Combination Meter > Clear DTCs

(c) Check for DTC.

Click here 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]; METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: DTC CHECK / CLEAR

Body Electrical > Combination Meter > Trouble Codes

Result

Proceed to

DTC B150819 is output.

A

DTC B150718 is output.

B
A

REPAIR OR REPLACE HARNESS OR CONNECTOR
B

GO TO STEP 19

18.

CHECK HEADLIGHT UNIT ASSEMBLY RH

(a) Remove the headlight unit assembly RH.

for Triple Beam Headlight:

Click here 2019 MY RAV4 RAV4 HV [11/2018 - 02/2019]; LIGHTING (EXT): HEADLIGHT ASSEMBLY (for Triple Beam Headlight): REMOVAL

for Single Beam Headlight:

Click here 2019 MY RAV4 RAV4 HV [11/2018 - 02/2019]; LIGHTING (EXT): HEADLIGHT ASSEMBLY(for Single Beam Headlight): REMOVAL

(b) Clear the DTC.

Click here 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]; METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: DTC CHECK / CLEAR

Body Electrical > Combination Meter > Clear DTCs

(c) Check for DTC.

Click here 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]; METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: DTC CHECK / CLEAR

Body Electrical > Combination Meter > Trouble Codes

Result

Proceed to

DTC B150819 is output.

A

DTC B150718 is output.

B
A

REPLACE HEADLIGHT ECU SUB-ASSEMBLY RH

B

GO TO STEP 22

19.

CHECK SIDE TURN SIGNAL LIGHT ASSEMBLY RH

(a) Disconnect the A side turn signal light assembly RH connector.

(b) Clear the DTC.

Click here 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]; METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: DTC CHECK / CLEAR

Body Electrical > Combination Meter > Clear DTCs

(c) Check for DTC.

Click here 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]; METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: DTC CHECK / CLEAR

Body Electrical > Combination Meter > Trouble Codes

Result

Proceed to

DTC B150819 is output.

A

DTC B150718 is output.

B
A

REPLACE OUTER REAR VIEW MIRROR ASSEMBLY RH

B

REPLACE SIDE TURN SIGNAL LIGHT ASSEMBLY RH

20.

CHECK REAR COMBINATION LIGHT SOCKET AND WIRE LH

(a) Disconnect the N18 rear combination light socket and wire LH connector.

(b) Clear the DTC.

Click here 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]; METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: DTC CHECK / CLEAR

Body Electrical > Combination Meter > Clear DTCs

(c) Check for DTC.

Click here 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]; METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: DTC CHECK / CLEAR

Body Electrical > Combination Meter > Trouble Codes

Result

Proceed to

DTC B150819 is output.

A

DTC B150718 is output.

B
B

REPLACE REAR COMBINATION LIGHT SOCKET AND WIRE

A

21.

CHECK HARNESS AND CONNECTOR (COMBINATION METER ASSEMBLY - REAR COMBINATION LIGHT SOCKET AND WIRE LH)

(a) Disconnect the G19 combination meter assembly connector.

(b) Disconnect the N18 rear combination light socket and wire LH connector.

(c) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

G19-5 (TRNL) or N18-4 (TRN) - Body ground

Always

10 kΩ or higher
OK

REPLACE COMBINATION METER ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

22.

CHECK FRONT TURN SIGNAL LIGHT SOCKET

(a) Disconnect the C front turn signal light socket connector.

(b) Clear the DTC.

Click here 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]; METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: DTC CHECK / CLEAR

Body Electrical > Combination Meter > Clear DTCs

(c) Check for DTC.

Click here 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]; METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: DTC CHECK / CLEAR

Body Electrical > Combination Meter > Trouble Codes

Result

Proceed to

DTC B150819 is output.

A

DTC B150718 is output.

B
A

REPLACE HEADLIGHT UNIT ASSEMBLY RH

for Triple Beam Headlight:

Click here 2019 - 2020 MY RAV4 RAV4 HV [11/2018 - 08/2020]; LIGHTING (EXT): HEADLIGHT ASSEMBLY (for Triple Beam Headlight): DISASSEMBLY

for Single Beam Headlight:

Click here 2019 MY RAV4 RAV4 HV [11/2018 - 02/2019]; LIGHTING (EXT): HEADLIGHT ASSEMBLY(for Single Beam Headlight): DISASSEMBLY

B

REPLACE FRONT TURN SIGNAL LIGHT SOCKET

for Triple Beam Headlight:

Click here 2019 - 2020 MY RAV4 RAV4 HV [11/2018 - 08/2020]; LIGHTING (EXT): HEADLIGHT ASSEMBLY (for Triple Beam Headlight): DISASSEMBLY

for Single Beam Headlight:

Click here 2019 MY RAV4 RAV4 HV [11/2018 - 02/2019]; LIGHTING (EXT): HEADLIGHT ASSEMBLY(for Single Beam Headlight): DISASSEMBLY

23.

CHECK REAR COMBINATION LIGHT SOCKET AND WIRE RH

(a) Disconnect the M14 rear combination light socket and wire RH connector.

(b) Clear the DTC.

Click here 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]; METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: DTC CHECK / CLEAR

Body Electrical > Combination Meter > Clear DTCs

(c) Check for DTC.

Click here 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]; METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: DTC CHECK / CLEAR

Body Electrical > Combination Meter > Trouble Codes

Result

Proceed to

DTC B150819 is output.

A

DTC B150718 is output.

B
B

REPLACE REAR COMBINATION LIGHT SOCKET AND WIRE

A

24.

CHECK HARNESS AND CONNECTOR (COMBINATION METER ASSEMBLY - REAR COMBINATION LIGHT SOCKET AND WIRE RH)

(a) Disconnect the G19 combination meter assembly connector.

(b) Disconnect the M14 rear combination light socket and wire RH connector.

(c) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

G19-6 (TRNR) or M14-4 (TRN) - Body ground

Always

10 kΩ or higher
OK

REPLACE COMBINATION METER ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

25.

INSPECT LIGHTS

(a) Inspect the illumination of each turn signal light.

Result

Proceed to

Front turn signal light LH does not blink (w/o Side Turn Signal Light).

A

Front turn signal light RH does not blink (w/o Side Turn Signal Light).

B

Front turn signal light LH and side turn signal light LH do not blink (w/ Side Turn Signal Light).

C

Front turn signal light RH and side turn signal light RH do not blink (w/ Side Turn Signal Light).

D

Rear turn signal light LH does not blink.

E

Rear turn signal light RH does not blink.

F
B

GO TO STEP 30

C

GO TO STEP 34

D

GO TO STEP 41

E

GO TO STEP 20

F

GO TO STEP 23

A

26.

CHECK HARNESS AND CONNECTOR (COMBINATION METER ASSEMBLY - INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY)

(a) Disconnect the G19 combination meter assembly connector.

(b) Disconnect the 4A instrument panel junction block assembly connector.

(c) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

G19-1 (LL) or 4A-5 - Body ground

Always

10 kΩ or higher
NG

REPAIR OR REPLACE HARNESS OR CONNECTOR
OK

27.

CHECK HARNESS AND CONNECTOR (COMBINATION METER ASSEMBLY - FRONT TURN SIGNAL LIGHT SOCKET)

(a) Disconnect the 4F instrument panel junction block assembly connector.

(b) Clear the DTC.

Click here 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]; METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: DTC CHECK / CLEAR

Body Electrical > Combination Meter > Clear DTCs

(c) Check for DTC.

Click here 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]; METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: DTC CHECK / CLEAR

Body Electrical > Combination Meter > Trouble Codes

Result

Proceed to

DTC B150819 is output.

A

DTC B150718 is output.

B
B

GO TO STEP 29

A

28.

CHECK HARNESS AND CONNECTOR (COMBINATION METER ASSEMBLY - FRONT TURN SIGNAL LIGHT SOCKET)

(a) Disconnect the G19 combination meter assembly connector.

(b) Disconnect the A60 front turn signal light socket connector.

(c) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

G19-1 (LL) or A60-1 (B) - Body ground

Always

10 kΩ or higher
OK

REPLACE COMBINATION METER ASSEMBLY

NG

REPLACE INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY

29.

CHECK FRONT TURN SIGNAL LIGHT SOCKET

(a) Disconnect the A60 front turn signal light socket connector.

(b) Clear the DTC.

Click here 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]; METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: DTC CHECK / CLEAR

Body Electrical > Combination Meter > Clear DTCs

(c) Check for DTC.

Click here 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]; METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: DTC CHECK / CLEAR

Body Electrical > Combination Meter > Trouble Codes

Result

Proceed to

DTC B150819 is output.

A

DTC B150718 is output.

B
A

REPAIR OR REPLACE HARNESS OR CONNECTOR
B

REPLACE FRONT TURN SIGNAL LIGHT SOCKET

30.

CHECK HARNESS AND CONNECTOR (COMBINATION METER ASSEMBLY - INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY)

(a) Disconnect the G19 combination meter assembly connector.

(b) Disconnect the 4A instrument panel junction block assembly connector.

(c) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

G19-2 (LR) or 4A-4 - Body ground

Always

10 kΩ or higher
NG

REPAIR OR REPLACE HARNESS OR CONNECTOR
OK

31.

CHECK HARNESS AND CONNECTOR (COMBINATION METER ASSEMBLY - FRONT TURN SIGNAL LIGHT SOCKET)

(a) Disconnect the 4F instrument panel junction block assembly connector.

(b) Clear the DTC.

Click here 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]; METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: DTC CHECK / CLEAR

Body Electrical > Combination Meter > Clear DTCs

(c) Check for DTC.

Click here 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]; METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: DTC CHECK / CLEAR

Body Electrical > Combination Meter > Trouble Codes

Result

Proceed to

DTC B150819 is output.

A

DTC B150718 is output.

B
B

GO TO STEP 33

A

32.

CHECK HARNESS AND CONNECTOR (COMBINATION METER ASSEMBLY - FRONT TURN SIGNAL LIGHT SOCKET)

(a) Disconnect the G19 combination meter assembly connector.

(b) Disconnect the A59 front turn signal light socket connector.

(c) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

G19-2 (LR) or A59-1 (B) - Body ground

Always

10 kΩ or higher
OK

REPLACE COMBINATION METER ASSEMBLY

NG

REPLACE INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY

33.

CHECK FRONT TURN SIGNAL LIGHT SOCKET

(a) Disconnect the A59 front turn signal light socket connector.

(b) Clear the DTC.

Click here 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]; METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: DTC CHECK / CLEAR

Body Electrical > Combination Meter > Clear DTCs

(c) Check for DTC.

Click here 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]; METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: DTC CHECK / CLEAR

Body Electrical > Combination Meter > Trouble Codes

Result

Proceed to

DTC B150819 is output.

A

DTC B150718 is output.

B
A

REPAIR OR REPLACE HARNESS OR CONNECTOR
B

REPLACE FRONT TURN SIGNAL LIGHT SOCKET

34.

CHECK HARNESS AND CONNECTOR (COMBINATION METER ASSEMBLY - INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY)

(a) Disconnect the G19 combination meter assembly connector.

(b) Disconnect the 4A instrument panel junction block assembly connector.

(c) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

G19-1 (LL) or 4A-5 - Body ground

Always

10 kΩ or higher
NG

REPAIR OR REPLACE HARNESS OR CONNECTOR
OK

35.

CHECK HARNESS AND CONNECTOR (COMBINATION METER ASSEMBLY - FRONT TURN SIGNAL LIGHT SOCKET)

(a) Disconnect the 4F instrument panel junction block assembly connector.

(b) Clear the DTC.

Click here 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]; METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: DTC CHECK / CLEAR

Body Electrical > Combination Meter > Clear DTCs

(c) Check for DTC.

Click here 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]; METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: DTC CHECK / CLEAR

Body Electrical > Combination Meter > Trouble Codes

Result

Proceed to

DTC B150819 is output.

A

DTC B150718 is output.

B
B

GO TO STEP 38

A

36.

CHECK HARNESS AND CONNECTOR (COMBINATION METER ASSEMBLY - OUTER REAR VIEW MIRROR ASSEMBLY LH)

(a) Disconnect the 4H instrument panel junction block assembly connector.

(b) Clear the DTC.

Click here 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]; METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: DTC CHECK / CLEAR

Body Electrical > Combination Meter > Clear DTCs

(c) Check for DTC.

Click here 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]; METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: DTC CHECK / CLEAR

Body Electrical > Combination Meter > Trouble Codes

Result

Proceed to

DTC B150819 is output.

A

DTC B150718 is output.

B
B

GO TO STEP 39

A

37.

CHECK HARNESS AND CONNECTOR (COMBINATION METER ASSEMBLY - FRONT TURN SIGNAL LIGHT SOCKET)

(a) Disconnect the G19 combination meter assembly connector.

(b) Disconnect the A60 front turn signal light socket connector.

(c) Disconnect the J13 outer rear view mirror assembly LH connector.

(d) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

G19-1 (LL) or A60-1 (B) or J13-1 (B) - Body ground

Always

10 kΩ or higher
OK

REPLACE COMBINATION METER ASSEMBLY

NG

REPLACE INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY

38.

CHECK FRONT TURN SIGNAL LIGHT SOCKET

(a) Disconnect the A60 front turn signal light socket connector.

(b) Clear the DTC.

Click here 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]; METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: DTC CHECK / CLEAR

Body Electrical > Combination Meter > Clear DTCs

(c) Check for DTC.

Click here 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]; METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: DTC CHECK / CLEAR

Body Electrical > Combination Meter > Trouble Codes

Result

Proceed to

DTC B150819 is output.

A

DTC B150718 is output.

B
A

REPAIR OR REPLACE HARNESS OR CONNECTOR
B

REPLACE FRONT TURN SIGNAL LAMP SOCKET

39.

CHECK OUTER REAR VIEW MIRROR ASSEMBLY LH

(a) Disconnect the J13 outer rear view mirror assembly LH connector.

(b) Clear the DTC.

Click here 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]; METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: DTC CHECK / CLEAR

Body Electrical > Combination Meter > Clear DTCs

(c) Check for DTC.

Click here 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]; METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: DTC CHECK / CLEAR

Body Electrical > Combination Meter > Trouble Codes

Result

Proceed to

DTC B150819 is output.

A

DTC B150718 is output.

B
A

REPAIR OR REPLACE HARNESS OR CONNECTOR
B

40.

CHECK SIDE TURN SIGNAL LIGHT ASSEMBLY LH

(a) Remove the A side turn signal light assembly LH connector.

(b) Clear the DTC.

Click here 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]; METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: DTC CHECK / CLEAR

Body Electrical > Combination Meter > Clear DTCs

(c) Check for DTC.

Click here 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]; METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: DTC CHECK / CLEAR

Body Electrical > Combination Meter > Trouble Codes

Result

Proceed to

DTC B150819 is output.

A

DTC B150718 is output.

B
A

REPLACE OUTER REAR VIEW MIRROR ASSEMBLY LH

B

REPLACE SIDE TURN SIGNAL LIGHT ASSEMBLY LH

41.

CHECK HARNESS AND CONNECTOR (COMBINATION METER ASSEMBLY - INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY)

(a) Disconnect the G19 combination meter assembly connector.

(b) Disconnect the 4A instrument panel junction block assembly connector.

(c) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

G19-2 (LR) or 4A-4 - Body ground

Always

10 kΩ or higher
NG

REPAIR OR REPLACE HARNESS OR CONNECTOR
OK

42.

CHECK HARNESS AND CONNECTOR (COMBINATION METER ASSEMBLY - FRONT TURN SIGNAL LIGHT SOCKET)

(a) Disconnect the 4F instrument panel junction block assembly connector.

(b) Clear the DTC.

Click here 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]; METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: DTC CHECK / CLEAR

Body Electrical > Combination Meter > Clear DTCs

(c) Check for DTC.

Click here 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]; METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: DTC CHECK / CLEAR

Body Electrical > Combination Meter > Trouble Codes

Result

Proceed to

DTC B150819 is output.

A

DTC B150718 is output.

B
B

GO TO STEP 45

A

43.

CHECK HARNESS AND CONNECTOR (COMBINATION METER ASSEMBLY - OUTER REAR VIEW MIRROR ASSEMBLY RH)

(a) Disconnect the 4H instrument panel junction block assembly connector.

(b) Clear the DTC.

Click here 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]; METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: DTC CHECK / CLEAR

Body Electrical > Combination Meter > Clear DTCs

(c) Check for DTC.

Click here 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]; METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: DTC CHECK / CLEAR

Body Electrical > Combination Meter > Trouble Codes

Result

Proceed to

DTC B150819 is output.

A

DTC B150718 is output.

B
B

GO TO STEP 46

A

44.

CHECK HARNESS AND CONNECTOR (COMBINATION METER ASSEMBLY - FRONT TURN SIGNAL LIGHT SOCKET)

(a) Disconnect the G19 combination meter assembly connector.

(b) Disconnect the A59 front turn signal light socket connector.

(c) Disconnect the I13 outer rear view mirror assembly RH connector.

(d) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

G19-2 (LR) or A59-1 (B) or I13-1 (B) - Body ground

Always

10 kΩ or higher
OK

REPLACE COMBINATION METER ASSEMBLY

NG

REPLACE INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY

45.

CHECK FRONT TURN SIGNAL LIGHT SOCKET

(a) Disconnect the A59 front turn signal light socket connector.

(b) Clear the DTC.

Click here 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]; METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: DTC CHECK / CLEAR

Body Electrical > Combination Meter > Clear DTCs

(c) Check for DTC.

Click here 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]; METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: DTC CHECK / CLEAR

Body Electrical > Combination Meter > Trouble Codes

Result

Proceed to

DTC B150819 is output.

A

DTC B150718 is output.

B
A

REPAIR OR REPLACE HARNESS OR CONNECTOR
B

REPLACE FRONT TURN SIGNAL LIGHT SOCKET

46.

CHECK OUTER REAR VIEW MIRROR ASSEMBLY RH

(a) Disconnect the I13 outer rear view mirror assembly RH connector.

(b) Clear the DTC.

Click here 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]; METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: DTC CHECK / CLEAR

Body Electrical > Combination Meter > Clear DTCs

(c) Check for DTC.

Click here 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]; METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: DTC CHECK / CLEAR

Body Electrical > Combination Meter > Trouble Codes

Result

Proceed to

DTC B150819 is output.

A

DTC B150718 is output.

B
A

REPAIR OR REPLACE HARNESS OR CONNECTOR
B

47.

CHECK SIDE TURN SIGNAL LIGHT ASSEMBLY RH

(a) Remove the A side turn signal light assembly RH connector.

(b) Clear the DTC.

Click here 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]; METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: DTC CHECK / CLEAR

Body Electrical > Combination Meter > Clear DTCs

(c) Check for DTC.

Click here 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]; METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: DTC CHECK / CLEAR

Body Electrical > Combination Meter > Trouble Codes

Result

Proceed to

DTC B150819 is output.

A

DTC B150718 is output.

B
A

REPLACE OUTER REAR VIEW MIRROR ASSEMBLY RH

B

REPLACE SIDE TURN SIGNAL LIGHT ASSEMBLY RH