PRE-COLLISION: PRE-COLLISION SYSTEM: U041881; Invalid Data Received from Brake System Control Module Invalid Serial Data Received; 2019 - 2021 MY RAV4 RAV4 HV [11/2018

Last Modified: 01-30-2024	6.11:8.1.0	Doc ID: RM100000001FOLS
Model Year Start: 2019	Model: RAV4	Prod Date Range: [11/2018 - 12/2021]
Title: PRE-COLLISION: PRE-COLLISION SYSTEM: U041881; Invalid Data Received from Brake System Control Module Invalid Serial Data Received; 2019 - 2021 MY RAV4 RAV4 HV [11/2018 - 12/2021]

DTC

U041881

Invalid Data Received from Brake System Control Module Invalid Serial Data Received

DESCRIPTION

for HV Model:

The forward recognition camera receives signals from the brake booster with master cylinder assembly (skid control ECU) corresponding to the brake control status via the CAN communication line.
When a brake control system malfunction signal is received from the brake booster with master cylinder assembly (skid control ECU), the forward recognition camera outputs U041881.

for Gasoline Model:

The forward recognition camera receives signals from the brake actuator assembly (skid control ECU) corresponding to the brake control status via the CAN communication line.
When a brake control system malfunction signal is received from the brake actuator assembly (skid control ECU), the forward recognition camera outputs U041881.

DTC No.	Detection Item	DTC Detection Condition	Trouble Area
U041881	Invalid Data Received from Brake System Control Module Invalid Serial Data Received	for HV Model: Once 3 seconds elapse after turning the ignition switch to ON, the forward recognition camera receives a brake control system malfunction signal from the brake booster with master cylinder assembly (skid control ECU) for approximately 1 second or more. for Gasoline Model: Once 3 seconds elapse after turning the ignition switch to ON, the forward recognition camera receives a brake control system malfunction signal from the brake actuator assembly (skid control ECU) for approximately 1 second or more.	for HV Model: Forward recognition camera Brake booster with master cylinder assembly (skid control ECU) for Gasoline Model: Forward recognition camera Brake actuator assembly (skid control ECU)

CAUTION / NOTICE / HINT

NOTICE:

When replacing the forward recognition camera, always replace it with a new one. If a forward recognition camera which was installed to another vehicle is used, the information stored in it will not match the information from the vehicle and a DTC may be stored.
If the forward recognition camera has been replaced with a new one, be sure to perform forward recognition camera adjustment.
HINT:

Forward recognition camera adjustment can be performed by using either "One Time Recognition" or "Sequential Recognition".

One Time Recognition:

Click here

Sequential Recognition:

Click here

PROCEDURE

1.	CHECK ELECTRONICALLY CONTROLLED BRAKE SYSTEM

(a) Check the DTCs.

for HV Model:

Click here

Chassis > ABS/VSC/TRAC > Trouble Codes

for Gasoline Model:

Click here

Chassis > Brake/EPB > Trouble Codes

OK:

Electronically controlled brake system DTCs are not output.

HINT:

If U041881 is output in the pre-collision system, electronically controlled brake system DTCs may also have been output. Check the electronically controlled brake system first.

REPLACE FORWARD RECOGNITION CAMERA

GO TO ELECTRONICALLY CONTROLLED BRAKE SYSTEM

for HV Model:

Click here

for Gasoline Model:

Click here