Last Modified: 01-30-2024 |
6.11:8.1.0 |
Doc ID: RM100000001FP4Z |
Model Year Start: 2019 |
Model: RAV4 |
Prod Date Range: [11/2018 -
] |
Title: METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: HOW TO PROCEED WITH TROUBLESHOOTING; 2019 - 2024 MY RAV4 RAV4 HV [11/2018 - ] |
HOW TO PROCEED WITH TROUBLESHOOTING
|
CAUTION / NOTICE / HINT
HINT:
-
Use the following procedure to troubleshoot the power door lock control system.
-
*: Use the Techstream.
PROCEDURE
1.
|
VEHICLE BROUGHT TO WORKSHOP
|
NEXT
|
|
|
2.
|
CUSTOMER PROBLEM ANALYSIS
|
NEXT
|
|
|
3.
|
INSPECT AUXILIARY BATTERY VOLTAGE
|
(a) Measure the auxiliary battery voltage with the ignition switch off.
Standard voltage:
11 to 14 V
If the voltage is below 11 V, recharge or replace the auxiliary battery before proceeding to the next step.
NEXT
|
|
|
4.
|
CHECK CAN COMMUNICATION SYSTEM*
|
(a) Check if CAN communication DTCs are output.
for HV Model:
for Gasoline Model:
Result
|
Proceed to
|
CAN communication DTCs are not output.
|
A
|
CAN communication DTCs are output.
|
B
|
B |
|
GO TO CAN COMMUNICATION SYSTEM
for HV Model:
for Gasoline Model:
|
A
|
|
|
(a) Check for DTCs and note any codes that are output.
Click here
Body Electrical > Combination Meter > Trouble Codes
(b) Clear the DTCs.
Click here
Body Electrical > Combination Meter > Clear DTCs
(c) Recheck for DTCs. Try to reproduce the DTCs by duplicating the conditions indicated by the DTCs.
Click here
Body Electrical > Combination Meter > Trouble Codes
Result
|
Proceed to
|
DTCs are not output (Fault can be simulated)
|
A
|
DTCs are not output (Fault cannot be simulated)
|
B
|
DTCs are output.
|
C
|
A
|
|
|
6.
|
PROBLEM SYMPTOM CONFIRMATION
|
NEXT
|
|
|
NEXT
|
|
|
8.
|
PROBLEM SYMPTOMS TABLE
|
(a) Refer to Problem Symptoms Table.
Click here
Result
|
Proceed to
|
Fault is not listed in Problem Symptoms Table.
|
A
|
Fault is listed in Problem Symptoms Table.
|
B
|
A
|
|
|
NEXT
|
|
|
NEXT
|
|
|
NEXT |
|
END
|
|